OzGemini.com

some yes hahaha!

i'll just leave this here.

yeah and weight, when i used to make them before i'd sleeve the tubes with another piece of tube, 200mm long, so definitely would have added a few kg's!

its been a long time coming for this diff, but i have got the money there for axles now and that was the last piece of the puzzle, so i thought i should get stuck into the diff shortening so i could work out when lengths the axles needed to be. a friend borrowed a diff to use for working out how muc...

that sucks, hopefully not too much cutting and shutting ?

bicep sounds very bad!

roll cage on the other hand is mint!

f*#k yeah thats looking the business now!

Jonno wrote:Here's me puts one seat in and thinks i've won the lottery!

Looking good and congrats on Claire!

Good to hear everything is going well
If you guys are free over easter should pop down!

to be fair that update is from approx may last year till now hehe

I also got a supercheap auto gift card for christmas so i used it to buy some seam sealer, and got stuck into testing it out on the boot! 4.JPG it works, but its f*#cking messy s*#t! so since this picture we have painted inside the boot with a finish product, but i dont have a picture of it. thats a...

despite most of summer being stinking hot dad and i got stuck into some panel work (as a slightly cooler alternative to welding) 1.jpg dad has a technique of getting rust converter, and a piece of steel wool, rub it over the rusty panel till all the surface rust is loosened then wipe it off with a c...

i've been saying for a long time that i wanted a nutcert kit, so for christmas i finally got one! 16.jpg i used it to mount some nuts in the firewall for the map sensor bracket, before the firewall was finished i just stuck my hand through the hole and put the nuts on them, so this was a real bonus!...

it was clear Claire was born to be a racer, barely a week old and she was in her first 5 point harness (albiet not too happy!)

this was a transfer from Newcaslte hospital to Maitland (closer to home for us and no longer needed to be in intensive care at newcastle)

Just another shot of the front of the car for perspective. 11.JPG And while dad and my brother were busy with the mig on the firewall i cracked out the tig to finish off the steering rack, it was cut and tacked together but never finished off .... till now. 12.JPG and barely a week after the baby sh...

With a baby fast approaching it was Marie's baby shower, she was out for the whole day pretty much so i invited dad and some brothers over, also firebug was loitering there ;) and we got the firewall pretty much sorted, its still got a few bits of welding to do and a heap of grinding but its on the ...

i also purchased some new rear rims, these are 15 x 10 in, with 4 inch more dish than the rim below. 5.jpg the rim wiht tyre on it is the 15 x 7's that i had on the gemini, and it has a 26 x 10in tyre on it. 6.jpg with as much done as we could with the engine in it was time to remove it so i could f...