OzGemini.com

Sump mods all finished for external pickup.

Big update time!

Got the roll bar mostly worked out and tacked in place.

The fix for the camera Dave is for Bill to have a mount on his roll cage that the camera can go onto

looking good man! 6000rpm burnout, good times!

I'm still not sure if your getting wheel spin or gearbox slip out of corners! we seriously need to get some data logging sorted for this car!

Update part 4! Got bits! 1.jpg So this gadget allows me to run an external oil pump pickup, and I am doing this as I am running a stud girdle now which the pickup gets in the way of! 2.jpg This will be welded inside the sump with the fitting on the outside to mate up with the one on the oil pump. 3....

Update part 3

Rough mock up of turbo location.

Update part 2

Started tacking the cage in place so I could make some more bits for it and work out where to mount the seat and such like. Did this front chassis rail support part of the cage so I can then see what area I have to work with for the turbo manifold.

Update and a new get it done target > http://www.ozgemini.com/forums/non-tech/viewtopic.php?f=54&t=48527&p=442521#p442521 Hint Dave/Bill to So more than likely it wont be done by then, but also, its no longer going to be possible for this car to do anything other than drags, the four link i...

oh dear!

last one has been so I'm happy

And the surprises just keep coming, I went to the machine shop to sort out another matter, and dead set 2 minutes after I arrived the courier turns up with these.

yep ebay special

So this arrived today :twisted: Its effectively the same size as what I have been running before but its ball bearing, and its also water cooled, so hopefully this will mean quicker spool and more longevity (water cooling) WP_20170404_08_08_23_Pro.jpg WP_20170404_08_08_05_Pro.jpg WP_20170404_08_07_4...

Well its been far too long since I've had a free weekend to spend some time in the shed! I have been thinking of the best way to run the fuel lines from the boot to the motor for a while now and I've finally came up with a solution and got to work on it :) Mounted some angle between the rear chassis...

as long as it works all good

lol