WINDSCREEN
WINDSCREEN
After installing the front or rear windscreen how do I install the locking strip, on a TE
-
- Regular
- Posts: 254
- Joined: Thu Aug 16, 2007 9:22 pm
- Location: brisbane
Re: WINDSCREEN
Never done the windscrreen myself, but have a read through this guide-
http://www.ozgemini.com/forums/tech/vie ... 34&t=22765
http://www.ozgemini.com/forums/tech/vie ... 34&t=22765
- LOK15
- Gemini Master
- Posts: 5452
- Joined: Thu May 19, 2005 3:30 pm
- Location: lok.lives@bundamba. ipswich.qld.au.earth
Re: WINDSCREEN
You need a special tool , like a little triangle that the strip runs though , and spreads the rubber so the locking strip feeds straight into it , bit of lube to assist..
Kinda like this..
Kinda like this..
Getting too old for this s*#t!!
Re: WINDSCREEN
Those are pretty crap, I got one but the type with a roller is much better
The dude who fitted my coupe screens fitted them to the rubber before fitting
The dude who fitted my coupe screens fitted them to the rubber before fitting
Re: WINDSCREEN
Read it again T D Cripes, it doesnt say anything about the sealing strip.TD_stripes wrote:Never done the windscrreen myself, but have a read through this guide-
http://www.ozgemini.com/forums/tech/vie ... 34&t=22765