Page 1 of 3

Gemracing Custom Plenums (Pics included)

Posted: Sun Aug 05, 2007 9:48 pm
by gemracing
Hi Guys,
Ive started doing plenums for 4c/d/e inlet manifolds..There made from mild steel and have a 4" round top with the rear plate fitted with 3x1/8 fittings..The front plate can suit either VLT/XF/VN V8 throttle body's...The cost is $350,which includes all machined surfaces.
PM me if interested.
*Throttle body not included.
Image
Image
Image

Darren

Posted: Mon Aug 06, 2007 8:31 am
by tunney
pictures when u got one thanks

Posted: Mon Aug 06, 2007 7:45 pm
by MRJUCY
does it including bottom manifold??

Posted: Mon Aug 06, 2007 8:01 pm
by turbogemguy2006
MRJUCY wrote:does it including bottom manifold??
I dont think so,plenum's usually the top have and not the bottom,thats if its a 2 piece like these are.

Re: Gemracing Custom Plenums (Pics included)

Posted: Mon Aug 06, 2007 8:25 pm
by KAMZ
gemracing wrote:Hi Guys,
Ive started doing plenums for 4c/d/e inlet manifolds..There made from mild steel and have a 4" round top with the rear plate fitted with 3x1/8 fittings..The front plate can suit either VLT/XF/VN V8 throttle body's...The cost is $350,which includes all machined surfaces.
*Throttle body not included.
Image
Image


Darren
Can this be used on a G180 or do you make one for G series????????????

Posted: Mon Aug 06, 2007 9:27 pm
by gemracing
Yes it will fit a G sereis engine,providing your either using the Paizza or Rodeo bottom section..
Darren

Posted: Tue Aug 07, 2007 6:04 pm
by 83TG200
Darren, call me ignorant or stupid for not researching, but, is it possible to mount this plenum backwards on the manifold? because i wish to run a barrel cooler up the back of the engine bay.

Cheers

- Michael

Posted: Tue Aug 07, 2007 7:36 pm
by gemracing
83TG200 wrote:Darren, call me ignorant or stupid for not researching, but, is it possible to mount this plenum backwards on the manifold? because i wish to run a barrel cooler up the back of the engine bay.

Cheers

- Michael
Yes,shouldn't be a problem...
Darren

Posted: Tue Aug 07, 2007 8:14 pm
by MRJUCY
but one problems how ya use fit accelerator cable??

Posted: Tue Aug 07, 2007 8:31 pm
by gemracing
MRJUCY wrote:but one problems how ya use fit accelerator cable??
Easy,the XF has it on the throttle body and you'll need to make one off one of the 4 bolts if using the VL one,its not that hard to do...
Darren

Posted: Tue Aug 07, 2007 8:41 pm
by DryftKult
this fit's the early rodeo runners yeah? the ones with the big single instead on the i-tec setup?

Posted: Tue Aug 07, 2007 9:21 pm
by gemracing
DryftKult wrote:this fit's the early rodeo runners yeah? the ones with the big single instead on the i-tec setup?
This plenum fits all the Rodeo efi inlet manifolds,including the Piazza too.Ive so far made them for a few types of the EFI bottoms,and they have fit them all...
Darren

Posted: Tue Aug 07, 2007 10:22 pm
by sly380
do they they come in different capacities for different engines?
or one size fits all?

Posted: Wed Aug 08, 2007 4:40 pm
by gemracing
sly380 wrote:do they they come in different capacities for different engines?
or one size fits all?
In what way???

Posted: Wed Aug 08, 2007 5:31 pm
by sly380
do you make different chamber sizes for different engine capacities?
as in one size for 2l and another size for a 2.6l?
if not what is the volume of the chamber?