Page 16 of 23

Posted: Thu Jun 28, 2012 4:19 pm
by LOK15
Philstd wrote:still making the td front spoilers?
Yes , im on my way out there in 5 mins to hopefully get a large order placed by someone here.

Posted: Sat Aug 18, 2012 8:48 pm
by stock_gem
any word on progress?

Posted: Sat Aug 18, 2012 10:19 pm
by LOK15
oops... forgot about you. If i woulda had my head screwed on , i couldve got andrew to drop it at brads place ( if it was made ). I'll buy some glass this week and hopefully have it done by next weekend ( will make it myself )

Posted: Sun Aug 19, 2012 10:15 am
by Gemmymad
You must be FLAT OUT!!!!!!!!!!

This is such a great thing your doing, don't know how much time you have, but maybe dabble into the HDT copy side of things for Commodores...

Congrats mate, keep it going!

Posted: Sun Aug 19, 2012 11:50 am
by LOK15
Gemmymad wrote:You must be FLAT OUT!!!!!!!!!!

This is such a great thing your doing, don't know how much time you have, but maybe dabble into the HDT copy side of things for Commodores...

Congrats mate, keep it going!
I always bite off more than i can chew work wise , kinda happens when you dont have a missus or kids distracting you. I do get alot done , but no-where near as much as i should , always behind on everything.

Will be getting stuck into things now its warming up , should be able to have alot of these things premade. :wink:

Posted: Sun Aug 19, 2012 11:23 pm
by Gemmymad
I'm the opposite, wife, kid, dogs,cat, 2 horses and a TX in the shed..
I should be doing more, but the time I spend 12 hours a day at work 5 days a week, then do the dad thing on the weekends, time just disappears...
One day.... It will all come together.
Keep going sir, you may even have some PF customers from Japan flooding your email address in the future!!

Posted: Mon Aug 20, 2012 1:57 am
by archangel62
Well I think it's about time I pipe up... :D

I've been pestering LOK15 for ages and ages about these bodykits, so I seem to have been lucky enough to get the first run. Obviously LOK15 has personal commitments - I don't want everyone to take this the wrong way and think they can get their kits tomorrow - but I can vouch for these items.

A few weeks ago, my living room was drowning in the following:
Late model bumpers, front and rear
ZZ/R front airdam
ZZ/R bonnet vents
CDT front spoiler
TX style front lip
and the ZZ/Z mudflaps

I'd like to say what a great job he's done with these. As with anything hand made (like my Isuzu badges) there will be minor imperfections, but these are few and far between, and easily touched up during paint prep. These parts will make your car look great, and are just what the Gemini community needs as tasteful parts get harder and harder to find, and are all 27+ years old. I have pictures floating around, but am currently a bit too busy to join the dots - but hopefully a few pieces will be painted and on cars over the next few months, so I'll post pictures then. I'm really happy with the parts - and the prices.

And as always, LOK15 was great to deal with, kept in contact, and sent stuff when he said he would. Thanks mate!

Stay tuned folks.

Posted: Mon Aug 20, 2012 9:21 am
by LOK15
yes , definitely pestering!!! hahahaha but it was good.. gentle reminders that i needed , DEFINITELY needed!!

Postage is always fairly quick once i have them. And once im fully setup to make them myself ( hopefully not too much longer ) then the process will be quicker as i'll be premaking them ( plan is 2 afternoons glassing , 2 arvo's machining heads and 3 days ( well 2 and a friday afternoon ) resto's in the shed with motors and bodywrk/painting ).

So please allow a bit of time between ordering and actually receiving .

Thankyou for your time.

Posted: Tue Aug 21, 2012 10:26 am
by LOK15
OK , big update.

I have made a table specifically for the glassing , and thismorning bought a 36kg roll of glass.. I'll be starting as of tonight making these myself , so should have ( withing a week or 2 ) actual on the shelf stock.

Posted: Tue Aug 21, 2012 7:47 pm
by ROTAHAVIK GEM
im keen for a CDT & ZZ/R front lip.... :wink:

Posted: Sat Aug 25, 2012 8:59 am
by LOK15
Have started making these , but will take longer than i anticipated as the hours in the day and energy in the body isnt going as far as i planned lol.

But needless to say , production has started.

Posted: Fri Sep 14, 2012 7:05 am
by LOK15
Image

progress so far. These arent perfect , so wont be for sale , but im not far off having them made correctly.

Posted: Fri Sep 14, 2012 9:31 pm
by stock_gem
hey, can i buy one of those practice ZZ/R bars for cheap as well as the proper one? incase i need a quick spare :lol:

Posted: Fri Sep 14, 2012 10:33 pm
by LOK15
let me cut the dags off and see if it doesnt fall apart. Will let you know tomorrow night.

Posted: Fri Sep 14, 2012 11:04 pm
by Busdriver
Let me know when you got early model bars