STREET WISE PERFORMANCE: UPDATE 6/1/2014
-
- Long Term Member
- Posts: 1060
- Joined: Thu May 19, 2005 1:39 pm
- Location: The Gul, VIC
Ladies and Gentlemen boys and girls i have the following quantites of flanges for sale! All flanges are 10mm Mild steel (250Mpa) and are precision laser cut to the highest quality. Get in quick i dont expect these to last long!
Twincam exhaust flange x10 $40each plus post
G Series exhaust flange x10 $37each plus post
T2 Turbo flange x10 $15 each plus post
Twincam exhaust flange x10 $40each plus post
G Series exhaust flange x10 $37each plus post
T2 Turbo flange x10 $15 each plus post
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
-
- Long Term Member
- Posts: 1060
- Joined: Thu May 19, 2005 1:39 pm
- Location: The Gul, VIC
Havinng a clean out.
t2 Flanges. $10each
Gemini exhaust manifold flanges $25 each
Custome plenums to suit VL throttle body only. ONLY $200
t2 Flanges. $10each
Gemini exhaust manifold flanges $25 each
Custome plenums to suit VL throttle body only. ONLY $200
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
-
- Long Term Member
- Posts: 1060
- Joined: Thu May 19, 2005 1:39 pm
- Location: The Gul, VIC
Hey everybody. Havent been in my advert for a while. Been flat out pumping out jobs.
If anyone is after anything i stock, welded or custom built, i have a gap for the next 4 weeks.
Quality of work is the best around, better than show standard but at prices affordable to everyone!
If anyone is after anything i stock, welded or custom built, i have a gap for the next 4 weeks.
Quality of work is the best around, better than show standard but at prices affordable to everyone!
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
-
- n00b
- Posts: 18
- Joined: Wed Jan 07, 2009 9:01 pm
- Location: Scarborough Perth - GEMSWA!
dez ive got one here if ya wanna take a look mine was made to suite xf tb should fit on 4z and g series runnersAdrenalFixa wrote:Do you sell t3 flanges made out of mild steel?
and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...
cheers
Des
BAD TRADES: CPT_sniper, False info on the product + product is f*#cked, waste of money, didnt even offer refund
-
- Long Term Member
- Posts: 1060
- Joined: Thu May 19, 2005 1:39 pm
- Location: The Gul, VIC
You have to ue 4z runners to inject a g series anyway. so yes. They fit either rodeo or piazza lower runners.AdrenalFixa wrote:Do you sell t3 flanges made out of mild steel?
and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...
cheers
Des
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
-
- Long Term Member
- Posts: 1060
- Joined: Thu May 19, 2005 1:39 pm
- Location: The Gul, VIC
Just an update for all you members out there. Have been pretty busy over the last 3-4 months turning out alot of work. My spare time is filling up fast with work to be done so if your after anything to be done, pm me straight away and will out a time for when i can fit your next job in!
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
Re: STREET WISE PERFORMANCE: UPDATE 8/8/09
Hi Mate,
How much for a plenum like the one below to suit sohc g180 shipped to perth???
How much for a plenum like the one below to suit sohc g180 shipped to perth???
1979 TD coupe with TG front end, SOHC G180, Single Weber carby, Lukey Extractors, ACL pistons, over sized valves, Ported and Polished head, stage 2 cam, balanced bottom end, 2.5" exhaust.
-
- Long Term Member
- Posts: 1060
- Joined: Thu May 19, 2005 1:39 pm
- Location: The Gul, VIC
Still here people, been flat out doing custom fabrication work. Looking for a few small projects to take on to fill in between the big ones i have.
Also still have 5x G series exhaust flanges Will do them for $30 each plus post untill they sell out.
Also still have 5x G series exhaust flanges Will do them for $30 each plus post untill they sell out.
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
-
- Posts: 0
- Joined: Sun Feb 05, 2012 8:52 pm
- Location: Central victoria
macca_loto wrote:Still here people, been flat out doing custom fabrication work. Looking for a few small projects to take on to fill in between the big ones i have.
Also still have 5x G series exhaust flanges Will do them for $30 each plus post untill they sell out.
Hello there
Do you still have g series exhaust flanges available.
Also need a t25/28 flanges.
Regards tony
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Still in the game?
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
-
- Long Term Member
- Posts: 1060
- Joined: Thu May 19, 2005 1:39 pm
- Location: The Gul, VIC
Sure am still in the game, dont own a gemini these days but still doing a tonne of custom work, building LS manifolds airbagging mini trucks you name it ill fab it.
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH