Page 2 of 3

Posted: Thu Nov 06, 2008 9:15 pm
by macca_loto
Ladies and Gentlemen boys and girls i have the following quantites of flanges for sale! All flanges are 10mm Mild steel (250Mpa) and are precision laser cut to the highest quality. Get in quick i dont expect these to last long!

Twincam exhaust flange x10 $40each plus post
G Series exhaust flange x10 $37each plus post
T2 Turbo flange x10 $15 each plus post

Posted: Mon May 04, 2009 5:53 pm
by macca_loto
Havinng a clean out.

t2 Flanges. $10each
Gemini exhaust manifold flanges $25 each
Custome plenums to suit VL throttle body only. ONLY $200

Posted: Sat Aug 08, 2009 6:36 pm
by macca_loto
Hey everybody. Havent been in my advert for a while. Been flat out pumping out jobs.

If anyone is after anything i stock, welded or custom built, i have a gap for the next 4 weeks.
Quality of work is the best around, better than show standard but at prices affordable to everyone!

Posted: Sun Aug 16, 2009 3:23 pm
by AdrenalFixa
Do you sell t3 flanges made out of mild steel?

and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...

cheers
Des

Posted: Thu Aug 20, 2009 3:14 pm
by Jenova
AdrenalFixa wrote:Do you sell t3 flanges made out of mild steel?

and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...

cheers
Des
dez ive got one here if ya wanna take a look mine was made to suite xf tb should fit on 4z and g series runners

Posted: Fri Aug 21, 2009 5:33 pm
by macca_loto
AdrenalFixa wrote:Do you sell t3 flanges made out of mild steel?

and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...

cheers
Des
You have to ue 4z runners to inject a g series anyway. so yes. They fit either rodeo or piazza lower runners.

Posted: Tue Dec 22, 2009 8:07 am
by gemini90
Hi strreet wise performance i was jst woundering if u hve a email address jst intrested in buying 1 of ur fuel surge tanks thanks

Posted: Sat Jan 23, 2010 11:14 am
by macca_loto
Just an update for all you members out there. Have been pretty busy over the last 3-4 months turning out alot of work. My spare time is filling up fast with work to be done so if your after anything to be done, pm me straight away and will out a time for when i can fit your next job in!

Re: STREET WISE PERFORMANCE: UPDATE 8/8/09

Posted: Thu Feb 18, 2010 1:52 am
by KAMZ
Hi Mate,
How much for a plenum like the one below to suit sohc g180 shipped to perth???


Image

Image

Posted: Sat Jul 09, 2011 2:46 pm
by macca_loto
Still here people, been flat out doing custom fabrication work. Looking for a few small projects to take on to fill in between the big ones i have.

Also still have 5x G series exhaust flanges Will do them for $30 each plus post untill they sell out.

Posted: Sun Feb 05, 2012 9:32 pm
by Tonysaustin
macca_loto wrote:Still here people, been flat out doing custom fabrication work. Looking for a few small projects to take on to fill in between the big ones i have.

Also still have 5x G series exhaust flanges Will do them for $30 each plus post untill they sell out.

Hello there

Do you still have g series exhaust flanges available.
Also need a t25/28 flanges.

Regards tony

Posted: Wed Feb 29, 2012 8:16 pm
by sammy
How much for a stainless steel power steering resivour. Radiator overflow tank and a wiper washer tank all in brushed stainless?

If you could send me a rough price.

Thanks
Sam

Posted: Sat Jul 21, 2012 9:50 am
by Jonno
Still in the game?

Posted: Fri Jul 27, 2012 12:44 am
by macca_loto
Sure am still in the game, dont own a gemini these days but still doing a tonne of custom work, building LS manifolds airbagging mini trucks you name it ill fab it.

Posted: Fri Jul 27, 2012 7:57 am
by F3ARED
Oi nugget, dont happen to have a DOHC inlet flange do ya?