THOMAS4PARTS--FOR ALL YOUR TURBO & PERFORMANCE NEEDS--

Have you got a great deal to offer all the members of OzGemini? If so Post the details here.
This is not for Private "for sale" add's
TURGEM
Long Term Member
Posts: 1597
Joined: Tue Jul 25, 2006 11:09 pm
Location: Brisbane:- 1.5bar above you

Post by TURGEM »

boosteddeo wrote:Got my MLS Head gasket, swivel feet and mls exhaust gasket just the other day, Lee is a top genuine bloke and i will recommend him to anyone thanks for the new gear Lee and i will see you soon for some more goodies.

Dan
dont be copying my sig brew


im interested in a distributor to suit a haltech, do these come with a home signal, have you got one on shelf
Thats Right Im a Long Term Member
WASTEGATES - WASTE 8S
IF YOU WANNA FLY, GIVE IT MORE P.S.I 8)
User avatar
Danman
Danmother
Posts: 322
Joined: Tue May 23, 2006 5:35 pm
Location: ACT

Post by Danman »

Been a bit slack but I have finally plugged the haltech into a laptop and tested it and it works! Downloaded the tune that was on it and uploaded another one onto it. Thanks for your help.
Dan.
MGOTD
Regular
Posts: 602
Joined: Wed Sep 26, 2007 1:52 am
Location: Noosa Sunshine Coast QLD
Contact:

Post by MGOTD »

TURGEM wrote:
boosteddeo wrote:Got my MLS Head gasket, swivel feet and mls exhaust gasket just the other day, Lee is a top genuine bloke and i will recommend him to anyone thanks for the new gear Lee and i will see you soon for some more goodies.

Dan
dont be copying my sig brew


im interested in a distributor to suit a haltech, do these come with a home signal, have you got one on shelf

if your chasing a G series distributor??? i have one and there is a home (sync) signal and a trigger signal and he has to make them so pretty sure they aren't an on the shelf item but look the goods and do the job well.


Cheers
Matt
Image
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

Double Row Timing Chain Gaskets---Now in stock $20 a set --
su59em
Regular
Posts: 711
Joined: Mon Mar 26, 2007 5:39 pm
Location: Sydney

Post by su59em »

is lee back from his break? :shock:
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

Yes, Lee is supplying parts...
Josh
Long Term Member
Posts: 826
Joined: Tue Jun 14, 2005 9:45 pm
Location: Port Kennedy

Post by Josh »

Image

Big shout out to these guys

Supplied all my gear in good time
Great to deal with and the machining work it fantastic!

Thanks again guys
Image
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

All good Josh...

We need a heap of 4ZE1 and 4ZD1 cam pulleys to keep the adjustable ones happening...
If you have any of them we need them ASAP...

Also need the feet from the old broken torque tube rubbers, if you have brought any off Lee
and you have not sent the old feet back Please do so to help keep the turn around time on the new rubbers down...

Even at your next cruise get them to one of you and forward them to me...

That is any

  • 4ZE1 pulleys
  • 4ZD1 pulleys
  • Old T/Tube feet


Call me on 0410290110

Cheers

Kristian
User avatar
LOK15
Gemini Master
Posts: 5452
Joined: Thu May 19, 2005 3:30 pm
Location: lok.lives@bundamba. ipswich.qld.au.earth

Post by LOK15 »

If anyone down south has the parts needed by lee ( if you dont need/want them ie broken TT mounts ), take them to kiama and give them to Andrew , he can pass them onto me and i can hand them to Kristian.
Getting too old for this s*#t!!
td.gem
New Member
Posts: 41
Joined: Tue Jun 29, 2010 8:52 pm
Location: western suburbs,victoria

Post by td.gem »

Hey mate. How much would I be looking at to make a solid fuel rail to suit o ring injectors for a Piazza manifold? I'll just modify the manifold to accommodate a bolt in rail. Posted to vic 3037
Josh
Long Term Member
Posts: 826
Joined: Tue Jun 14, 2005 9:45 pm
Location: Port Kennedy

Post by Josh »

Any photos of your custom billet flywheel and clutch setups?
Image
fumeys_td
n00b
Posts: 2
Joined: Thu Apr 12, 2012 12:14 am
Location: wollongong n.s.w

Post by fumeys_td »

you wouldnt have any of the flat plate things that go to head on extractors looking at making extractors for my g200w twincam but cant find the flange bit to start with
User avatar
Jonno
Korean Jesus
Posts: 2370
Joined: Tue Jul 25, 2006 5:28 pm
Location: Canberra. Where the Fast Geminis live
Contact:

Post by Jonno »

Do you have any 4z mls in stock?

I want to buy one First week of December is this achievable?
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
Image
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
TURGEM
Long Term Member
Posts: 1597
Joined: Tue Jul 25, 2006 11:09 pm
Location: Brisbane:- 1.5bar above you

Post by TURGEM »

those g series distributors... have you got a wiring diagram for them eg. crank, home signal
Thats Right Im a Long Term Member
WASTEGATES - WASTE 8S
IF YOU WANNA FLY, GIVE IT MORE P.S.I 8)
gem56
New Member
Posts: 20
Joined: Sun Aug 17, 2008 5:41 pm
Location: Brisbane west

Re: THOMAS4PARTS--FOR ALL YOUR TURBO & PERFORMANCE NEEDS--

Post by gem56 »

How can I get a Torque tube rubber and a donut rubber

I have the feet and dust covers

Russell 0408763268
Post Reply