Page 1 of 3

F.S 12A /13B Turbo & N/A Rotary Conversion Kits

Posted: Mon Feb 09, 2009 10:05 pm
by SLIMER
Gemini conversion kits to suit 12A, 13B, Turbo and NON turbo rotary engines.


These Kits will include:

Engine Mount (plate which bolts onto the front of the actual engine).
Crossmember.
Gearbox mount to suit various gearboxes, (some have different rubber mounts, just let me know which one you have...or if you dont know just send me a picture).
Rubber mounts to suit (rubber or solid mounts).
Custom sump to suit.

All kits are painted black


Also available is a custom made clutch cable mechanism, (allows you to keep the original gemini clutch cable) which saves you alot of modifying and headaches trying to convert it over to hydrolic type. These mechanisms are $90 posted anywhere in Australia (or $70 if purcahsing a conversion kit). And are a bolt in conversion.
If using the standard RX7 injection system (if your doing a turbo conversion) these may not fit 100% as the intake sits really low to the motor....not much room.

Fitting the conversion kits, "drive in - drive out" deals and modplating are available, i have done numerous conversions both 12a and 13B, turbo and non turbo.

Drive in drive out deals are no worries just need to be booked in advance.

Just let me know what you want and i will tell what you will be looking at cost wise, and time wise.



Optional Extras:

Custom High pressure/temp oil lines to fit front mount oil cooler = $130
Custom Radiators = from $150
Alloy radiators = from $300
Wiring loom to suit all model gemini's = $100
Custom extractors = $350
Turbo manifold = $400



Contact

Steve on
0421646875 or email slimers@optusnet.com.au



Image


These pics are just of the jig model, the real ones will be painted in gloss black and will have different new rubber mounts (the ones in the pics are just ones i had laying around)


ImageImage




BEFORE

Image



AFTER

Image
Image
Image


progress pics of the engine and parts after they had been sand blastered and painted.

Image
Image
Image
Image
Image
Image

Image
Image
Image

Posted: Thu Mar 05, 2009 4:14 pm
by SLIMER
Bump for the pics, the pics are of the jig model.

Posted: Thu Mar 05, 2009 4:58 pm
by Poida'z gem
This is awsum! if only i hadint already bought my 2L turbo:(

might end up buying one of these still....

wicked kit mate!

Posted: Tue Mar 24, 2009 7:13 pm
by j_portgemini
awesome idea slimer atlast a nice easy way to fit a rotary to our gems will be definatly discussing a couple of kits from you for shaw :lol:
talk soon

Posted: Wed Mar 25, 2009 10:43 am
by phatty
this should be moved to "ozgemini.com advertisements" section for sure.. great kit mate

Posted: Wed Mar 25, 2009 11:05 am
by fat_tx
wats a good engine nd box worth on top?
hav a feeling theres gonna be a million more rotor gems now :D

cheers

Posted: Thu Mar 26, 2009 5:40 pm
by j_portgemini
will be definatly using my stimulous package money on one woo hoo

Posted: Mon Mar 30, 2009 5:51 pm
by 06EMY
fat_tx wrote:wats a good engine nd box worth on top?
hav a feeling theres gonna be a million more rotor gems now :D

cheers
To answer your question, here is an example, and a very good one at that, on what sort of package you can get...

http://ausrotary.com/viewtopic.php?f=48&t=168240

Posted: Mon Mar 30, 2009 5:55 pm
by fat_tx
cheers mate!!

Posted: Wed Apr 01, 2009 4:42 pm
by one
i love you slimer.. i wish i seen this earlier hey.. time to find a s@*tter!

enquiry

Posted: Mon Apr 27, 2009 6:26 pm
by Philly09
ey im looking at a conversion for a TF sedan, 13b turbo probably now id prob need the whole kit i was prob gonna run with all same gear that goes with 13b, tailshaft n trannie so basically all stock till later when i wanna mod it slightly just curious to know what it cost for the whole kit? just curious on a price of what itd cost for the lot?

Re: enquiry

Posted: Tue Apr 28, 2009 11:02 am
by SLIMER
Philly09 wrote:ey im looking at a conversion for a TF sedan, 13b turbo probably now id prob need the whole kit i was prob gonna run with all same gear that goes with 13b, tailshaft n trannie so basically all stock till later when i wanna mod it slightly just curious to know what it cost for the whole kit? just curious on a price of what itd cost for the lot?
send me a list of everything you need and want and ill let you know how much you will be looking at.

Posted: Fri May 08, 2009 6:36 pm
by SLIMER
bump for tight ass may..lol

Posted: Wed May 27, 2009 1:59 pm
by charliebrown069
I found this guy named Drew or Sir20b on ausrotary. He is selling and has been for a few years now rotary engines, gearboxes, frontcuts etc. All items are imported from japan and sold with a startup warranty. Postage is available to all locations across australia or pick up available from brisbane where he trades. no prices are listed so you have to either call him or become a member and pm him. the wesite is

Aus Rotary

Posted: Wed May 27, 2009 4:31 pm
by SLIMER
charliebrown069 wrote:I found this guy named Drew or Sir20b on ausrotary. He is selling and has been for a few years now rotary engines, gearboxes, frontcuts etc. All items are imported from japan and sold with a startup warranty. Postage is available to all locations across australia or pick up available from brisbane where he trades. no prices are listed so you have to either call him or become a member and pm him. the wesite is

Aus Rotary

thats a good link, alot of engine and parts there...lol