Page 1 of 5
MetalCraft Marine Aluminium Plenums
Posted: Thu Mar 19, 2009 8:11 am
by Josh
Hi Guys
For those who are interested in polished aluminium Plenum's for G series and 4Z series I will be making these. Prices will be announced soon but for the moment here are a few pictures.
These Plenum's can have bell mouths if you wish. They have 12mm CNC machined feet and
BOLT directly to existing runners.
I will also be making a new style that gets rid of the stock runners and instead of the runners having a 90 degree bend in them they will run straight into a custom Plenum.
If you have any more enquires send me an email at
josh@metalcraftmarine.com.au or call me during business hours on 0408 008 537.
Thanks
Josh
Posted: Thu Mar 19, 2009 10:29 am
by SICKTG
looking good josh!
Posted: Fri Mar 20, 2009 7:40 pm
by sly380
looks real nice but are you sure it will fit under the bonnet?
Posted: Fri Mar 20, 2009 9:33 pm
by Josh
If the factory one fits then so should this. The throttle body points down towards the drivers side headlight. Top is only tack welded on so the plenum can still be trimmed down if need be.
Just waiting on Jazza to come pick it up for a pre fit. Will have more pics then
Josh
MetalCraft Marine
Posted: Sun Mar 22, 2009 8:12 pm
by jhartley
good looking plenums Josh ive been wanting a new one for some time now for my race car!
i designed one quite similar in solid works but never found the time to build it i run an xf throttle body on my car.
one that bolts straight to the head could be very interesting too looking forward to seeing what you come up with.
i would be interested to get one of those babies
cheers J
Posted: Mon Mar 30, 2009 9:14 am
by jhartley
you could have smaller studs instead of those stupid rodeo ones.
it would be good to be able to take the inlet manifold off without
having to take off the whole head!
Posted: Mon Mar 30, 2009 11:05 am
by AdrenalFixa
Looks Awesome Josh, awesome welds
Posted: Thu May 07, 2009 10:58 pm
by Josh
Just some more pics of these plenum's. Nice round edge at the start/end of the runner was achieved and throttle body flange turned out really nice IMO.
Josh
MetalCraft Marine
Posted: Mon May 11, 2009 6:13 pm
by MRJUCY
Looks beauty job, wats price?? im very interested in...
Posted: Thu May 14, 2009 10:14 pm
by Josh
Finished. Price is
$480 Polished (Nothing leaves my workshop unless it looks show spec, sorry won't sell them raw atm)
* CNC cut feet
* Choice of throttle Body
* Brake booster pickup under plenum
* Factory Gemini throttle cable retained so suit VN emotec style throttle body
* Other style plenums available on request
Thanks
Josh
Posted: Mon Oct 26, 2009 10:01 pm
by bonsvr
Whats the air distribution like on one of these plenums, do any cylinders starve?
Posted: Wed Nov 17, 2010 3:30 pm
by Josh
Posted: Wed Nov 17, 2010 3:31 pm
by Josh
New style, Suits BMI Billet Throttle body for people with the CESH!
Posted: Wed Nov 17, 2010 5:35 pm
by GEMWRC
Very nice Josh looks the goods .
Posted: Thu Nov 18, 2010 4:01 pm
by Josh
Cheers dude!