CHEAP PANEL & PAINT REPAIRS IN BRISBANE (NEW PICS 22/8/0

TRISTAN86 · Post by **TRISTAN86** » Fri May 29, 2009 2:37 pm

Hey everyone!

I am looking into starting a little workshop at home so that i can get back to doing what i love....Fixing up peoples pride and joys!!
I'm a qualified panel beater and spraypainter, I take pride in my work and i am good at what i do.

I'm just trying to get a bit of an idea of how many people would be interested in any of the following services at a GOOD PRICE!

*Rust removal and plating/(fibreglassing depending on what you want to spend)

*Rust proofing(underbody and inner guards)

*Engine bay mods ( I can make nearly anything look "factory")But nothing illegal/unsafe.

*Dents fixed, primed and ready to paint or painted for extra

*Full resprays, repairs and partial resprays

*Buffing/Burnishing, Paint restoration

*Body kits fitted and painted

*Wheels painted

*Detailing (interior/engine bay)

There isn't alot that i can't do, so PM me or call me on 0422762024 if you have any other related jobs you need done!

Here's a few pics of my latesest job:
This is an early photo before the panel damage occurred but has rust.

Debadged the boot, Fibreglassed the mounting holes APROX. $60 FOR REPAIRS UP TO PRIMER

Rust holes along top of windsreen. APROX $120 FOR FIBREGLASS REPAIRS UP TO PRIMER

Fibreglassed aerial hole. APROX. $30 UP TO PRIMER

Repaired rust holes and a large dent in roof. DENTS APROX. $30 EA UP TO PRIMER

Fixed 3 large dents in bonnet

After shots.

One for the hell of it!

Used 1 litre of colour @ $100/L and 1.8 litres of clear @ $30/L =$154 for paint alone.
Add labour/materials for paint prep aprox $400
Makes a price of about $900-1000 for this particular job.

Each job is different so prices WILL fluctuate accordingly.

beerhound · Post by **beerhound** » Fri May 29, 2009 3:37 pm

http://www.ozgemini.com/forums/non-tech ... .php?t=134

terra82 · Post by **terra82** » Fri May 29, 2009 5:16 pm

yeah but slimer is on the northside not the south side

suprafrog · Post by **suprafrog** » Fri May 29, 2009 6:06 pm

terra82 wrote:yeah but slimer is on the northside not the south side

and he can be very busy at times...

TRISTAN86 · Post by **TRISTAN86** » Mon Jun 01, 2009 2:24 pm

BUMP.

GoForGreen · Post by **GoForGreen** » Mon Jun 01, 2009 2:38 pm

i would be interested in some work. depending on if your cheap or not

.

wer bout on Sth Side you at

modern bliss · Post by **modern bliss** » Mon Jun 01, 2009 3:18 pm

beerhound wrote: http://www.ozgemini.com/forums/non-tech ... .php?t=134

clearly only one person per job...

te gem 80 · Post by **te gem 80** » Mon Jun 01, 2009 8:09 pm

i need to get some touch ups done and thinkin bout the inside of my wagon boot.
where abouts on the south side are u???
when could i get a quote?
cheers tim

TRISTAN86 · Post by **TRISTAN86** » Tue Jun 02, 2009 8:03 am

I'm in the rochedale area, You can PM me for details and a day/time for a quote.

I can go very cheap depending on how much work is to be done and how much you want to help me or do yourself before you give it to me. Obviously more time means more $$.

There is a cheap way and an expensive way to do everything, it all depends what you want.

TRISTAN86 · Post by **TRISTAN86** » Fri Jun 05, 2009 2:21 pm

F3ARED · Post by **F3ARED** » Fri Jun 05, 2009 4:10 pm

Now that everyones beaten their chests abit, please stay ON TOPIC.

Tristan, might be an idea to put some before/after photos of some of the things youve done cheif

TRISTAN86 · Post by **TRISTAN86** » Tue Jun 09, 2009 2:07 pm

I will try and get some photo's up soon. I don't have the net at home yet so its hard to upload stuff at work.

I don't have a lot of pics yet cos i've only done a few home jobs and didn't really take any pictures

most of my work has been done at the panel shops i've worked at.

Some of you would know "IVS" (Import vehicle solutions) I used to do most of their fitting/repair and refitting and painting of body kits on their new imports before they went onto the lot for sale.
I also used to do alot of work vans, trucks and utes for east coast commercials before they went on the lot as well! While working at one place for 2 yrs I was doing all the body repairs on the "Kanga Loaders" entry in the v8 brute ute series!

TRISTAN86 · Post by **TRISTAN86** » Tue Jun 16, 2009 8:53 am

Pics coming soon... Internet's being installed this week so i'll hopfully get some pics of jobs and my project thread started this weekend!

I'm hoping to do a fairly big project thread on my TG cos i've got s@!T loads of progress photos of rust repairs and engine bay prep so far!!

TRISTAN86 · Post by **TRISTAN86** » Thu Jun 18, 2009 7:18 am

Some pics up now!

b3n_9sec · Post by **b3n_9sec** » Thu Jun 18, 2009 8:13 am

give us some sort of idea with prices, maybe use your pics as examples. like the rust spots dents etc

OzGemini.com

CHEAP PANEL & PAINT REPAIRS IN BRISBANE (NEW PICS 22/8/0

CHEAP PANEL & PAINT REPAIRS IN BRISBANE (NEW PICS 22/8/0

Re: CHEAP PANEL/PAINT/RUST REPAIRS IN BRISBANE (new pics!)