Thomas4Parts-MLS Head & Exhaust gaskets

Have you got a great deal to offer all the members of OzGemini? If so Post the details here.
This is not for Private "for sale" add's
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Thomas4Parts-MLS Head & Exhaust gaskets

Post by 155-low »

Thomas4parts for all your performance needs.
We have been turbo charging and modifying Gemini's for over 20 years.


In the Top Ten street registered four cylinders in Australia 1991 to 1996
11.90 at 117 MPH in 1991 G180 TO4 DCOE WEBER
NO NITROUS
11.46 at 112 MPH in 1996 G180 TO4 DCOE WEBER NO NITROUS
9.87 at 137 MPH 2007 4ZD1 NO NITROUS
7.13 at 184MPH TWIN TURBO 13B ALTERED-- 33 PSI BOOST --(TUNED BY LEE)
10.42 at 131mph 808 SERIES 6 13B 13 PSI BOOST


FOR SALE....

MLS Head Gaskets... $280
MLS Turbo base Gaskets... From $16
MLS "G" & "Z" Exhaust Manifold Gaskets... $35 a set
MLS Gaskets to suit Turbonetics Deltagate or Tial 35mm or 38mm wastegates... $10 each



Double Row Timing Chain Gaskets -- Now in stock $20 a set...

Image Image



For Sale----- MLS Head gaskets that are made to suit G161's, G180's and G200's with single or double row timing chains. The front bolts are slotted and the water jacket is made smaller so it works with both timing chain setups, the bores have been aligned to match the centres of the block so the gasket seals evenly around the bores. These are capable of boost pressures above 50PSI. We have now got aligned gaskets to suit 4ZC1, 4ZD1, 4ZE1 engines.


We can get them in G161, G180, G200, 4ZC1, 4ZD1 and 4ZE1 $280 Plus postage.

We now have the G200 head gaskets. With these gaskets we have taken into account the water jackets for G161 head onto the G200 bottom end------ In Stock Now------


All head gaskets are 3 layer and 1.3mm thick...


MLS G161, G180, G200 gaskets.

Image Image

Image Image

MLS 4ZC1, 4ZD1, 4ZE1 gaskets.

Image

This is a couple of gaskets from our new MLS range

Image

From the top Left clockwise, they are to suit...

TO4 Split Pulse-- $20
TV Flange--------- $20
TO4 Single entry- $18
T3----------------- $16
T04 Euro Flange- $18
T2----------------- $16
TA45-------------- $20


These Turbo gaskets are not single use gaskets like most of your normal turbo gaskets. These gaskets are good for a couple turbo changes and seal like no other....



We have MLS Gaskets to suit Turbonetics Deltagate or Tial 35mm or 38mm wastegates... 2 layer with a flame ring... $10 each

Image

We have MLS gaskets to suit "G" and "Z" series exhaust manifold. These gaskets are 5 layer with a flame ring...$35 a set


"Z" series

Image

"G" series

Image

To order any of these Gaskets, we need the following....

You need to PM Thomas4parts with your address and the engine with a bore size you wish to buy...
With this received I will PM you back with our Bank Details, and a total you need to transfer. We need the transfer to be tagged with your username for easy ID of your payment( if the bank will only tag with numbers or your username will not work), PM me with the tag you put with your payment. This way I can look for it in our account...






Info on Lee's parts...PM Thomas4parts

Click on the orange thomas4parts to send a PM.....
Last edited by 155-low on Tue Aug 18, 2015 7:38 am, edited 24 times in total.
gemracing
Gemini Master
Posts: 885
Joined: Wed May 25, 2005 7:45 pm
Location: Melton,Vic.....
Contact:

Post by gemracing »

Hey Lee,

Will these gaskets stop the problem of water filling the overflow bottle with boost pressures at say over 40psi and 550+hp at the tyres??

Darren
Current Car.....


-G180 TX red coupe 9.20@148.6mph on a 26x8.5" tyre and no nitrous 2380lbs with driver
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

They work as you can see with Damien's gemini running a 8.93 at 148mph,

Last edited by 155-low on Mon Sep 28, 2009 9:46 pm, edited 1 time in total.
smokey
Regular
Posts: 337
Joined: Sat Oct 27, 2007 4:40 pm
Location: padstow

Post by smokey »

Thats an excellent point ill take one P.M sent;)
YEP9S
Chatterbox
Posts: 66
Joined: Thu Feb 14, 2008 6:44 am
Location: Gold Coast

Post by YEP9S »

If anyone is unsure on Thomas4Parts MLS gaskets think again!!!!!!!!!
I have done 1 1/2 days on the dyno 20plus runs, 30approx passes at the track with 38-40psi and now it believe it is making around 540hp at the tyres.
Still on the first gasket.????????!!!!!!!!!! :D :D :D :D
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

We have some arriving in the next couple of weeks the first of many regular shipments from our supplier. "Z" series included
Boosted26L
Regular
Posts: 286
Joined: Tue Aug 15, 2006 3:36 pm
Location: Newcastle

Post by Boosted26L »

155-low wrote:We have some arriving in the next couple of weeks the first of many regular shipments from our supplier. "Z" series included
i sent you a pm a couple of weeks ago about a 4ZE1 gasket

any chance you have the info i wanted?
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

Gaskets arrived today and shipping from Monday...
Turbo base gaskets added to first post... :)
Buggzy
Long Term Member
Posts: 1401
Joined: Wed Oct 05, 2005 5:58 pm
Location: Ballarat

Post by Buggzy »

any chance of you making a gasket to suit the tial 38mm wastegate flange?? no where can i find it and im very much over making them myself from gasket paper.
Image
Boostin for lyfe!
Scratch09
Regular
Posts: 175
Joined: Sat Sep 12, 2009 9:04 am
Location: goodna

hey

Post by Scratch09 »

hey i need a head gasket both sides of head for the exhaust and manafold asap when u recon u could get them for me cheers mate
lukes_tg
Regular
Posts: 235
Joined: Mon Aug 10, 2009 6:17 pm
Location: Brisbum
Contact:

Re: hey

Post by lukes_tg »

Scratch09 wrote:hey i need a head gasket both sides of head for the exhaust and manafold asap when u recon u could get them for me cheers mate
wtf? lol
PSIGEM
Long Term Member
Posts: 1670
Joined: Wed Jul 19, 2006 7:55 pm
Location: Hobart, Tasmania

Post by PSIGEM »

Go down to supercheap or repco or anywhere and get them...
I love old cheeseburgers ...
lukes_tg
Regular
Posts: 235
Joined: Mon Aug 10, 2009 6:17 pm
Location: Brisbum
Contact:

Post by lukes_tg »

ohh you mean exhaust and intake manifold gaskets?
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

Pictures of the new exhaust flange MLS gaskets that are in stock now...

We have 9 sets of the "G" series and 8 sets of the "Z" series gaskets left...
ROTAHAVIK GEM
Long Term Member
Posts: 1421
Joined: Thu Aug 04, 2005 9:04 pm
Location: looking thru your sisters window!!

Post by ROTAHAVIK GEM »

put one aside for my engine... :D head and exhaust.

just add it to my bill...lmao
Image

Previously Known As gemzilla1
Post Reply