Early & Late Centre Console Gauge Plates
Early & Late Centre Console Gauge Plates
I have made up these plates for easy gauge installs into early (TX-TE)
console and (TF-TG) model auto console...
Here are some pictures of the couple I have made up ...
This is the TF-TG 1...
I have made up these angled spacer rings so the gauges can
be angled towards the driver for a clearer view...
The gauge holes are to suit 52mm/ 2inch guages. The lights in the
middle are optional...
I can supply the lights if you need, they are from Jaycar, they are
a couple of dollars each...
They are made out of 2mm aluminium sheet...
This 1 I have made for 1 of the members...
They are $45 polished posted anywhere
in Australia...
They are $35 unpolished posted anywhere
in Australia...
Spacer rings are sold in pairs.. They are $10...
console and (TF-TG) model auto console...
Here are some pictures of the couple I have made up ...
This is the TF-TG 1...
I have made up these angled spacer rings so the gauges can
be angled towards the driver for a clearer view...
The gauge holes are to suit 52mm/ 2inch guages. The lights in the
middle are optional...
I can supply the lights if you need, they are from Jaycar, they are
a couple of dollars each...
They are made out of 2mm aluminium sheet...
This 1 I have made for 1 of the members...
They are $45 polished posted anywhere
in Australia...
They are $35 unpolished posted anywhere
in Australia...
Spacer rings are sold in pairs.. They are $10...
Last edited by 155-low on Wed Oct 21, 2009 3:26 pm, edited 2 times in total.
It is not Saturday but here is some progress pics...155-low wrote:I got a late model auto console today and I will have a demo 1 ready to go as soon as I can.....
I will post the pics on Saturday
It is not finished as I will get some alluminum tube so the gauges can be angled towards the driver. I will get it tomorrow and finish the demo 1...
I made the angled rings today, so the gauges point towards the driver and to hold the plate in at the
top. I have made the setup so the console does not have to cut or modified, using the angled ring
made this possible. The 52mm gauges are tight into the standard console witch restricted me
from angling the gauges up.
Cheers
top. I have made the setup so the console does not have to cut or modified, using the angled ring
made this possible. The 52mm gauges are tight into the standard console witch restricted me
from angling the gauges up.
Cheers
Re: Early & Late Centre Console Gauge Plates
hey verry intrested in these with spacers would yu just drop them off to logan area?