ARP Head stud kit

Use this Forum to organise Group Buys
gemracing
Gemini Master
Posts: 885
Joined: Wed May 25, 2005 7:45 pm
Location: Melton,Vic.....
Contact:

ARP Head stud kit

Post by gemracing »

Hi guys,
To those interested,I can get ARP head studs(in kit form) to suit a G series engine,I need to know who may be interested,The price is $250 a set.
Regards,
Darren
Last edited by gemracing on Sun May 20, 2012 11:36 am, edited 1 time in total.
Current Car.....


-G180 TX red coupe 9.20@148.6mph on a 26x8.5" tyre and no nitrous 2380lbs with driver
15uzu
Regular
Posts: 247
Joined: Mon Jun 13, 2005 11:40 pm
Location: Slacks Creek

Post by 15uzu »

Can you also see if the kits are suitable for 4Z as well?
Image
gemracing
Gemini Master
Posts: 885
Joined: Wed May 25, 2005 7:45 pm
Location: Melton,Vic.....
Contact:

Post by gemracing »

15uzu wrote:Can you also see if the kits are suitable for 4Z as well?
I'll find out.
Darren
Current Car.....


-G180 TX red coupe 9.20@148.6mph on a 26x8.5" tyre and no nitrous 2380lbs with driver
Bradlze
Regular
Posts: 626
Joined: Tue May 24, 2005 3:29 pm
Location: Perth- Carine

Post by Bradlze »

i would also be interested for one for a 4z
sly380
Regular
Posts: 508
Joined: Wed Nov 02, 2005 12:04 pm
Location: ballina nsw

Post by sly380 »

me too.
Here we go again😒
gemracing
Gemini Master
Posts: 885
Joined: Wed May 25, 2005 7:45 pm
Location: Melton,Vic.....
Contact:

Post by gemracing »

Bradlze wrote:i would also be interested for one for a 4z
I don't have a 4Z series standard bolt,If anyone could send me a sample that would be great..
Darren
Current Car.....


-G180 TX red coupe 9.20@148.6mph on a 26x8.5" tyre and no nitrous 2380lbs with driver
F3ARED
Moderator
Posts: 2705
Joined: Wed Sep 28, 2005 11:55 pm
Location: Melbourne, Victoria

Post by F3ARED »

Im in for the headstud kit Darren. Does the block have to be redrilled and tapped?

What about rod bolts?

Nick-
Previously GeminiCoupe/GeminiRollingShell/SCAR3D/Jonnoisac#nt

78 TD Gemini Sedan - R.I.P
81 TE Gemini Sedan
gemracing
Gemini Master
Posts: 885
Joined: Wed May 25, 2005 7:45 pm
Location: Melton,Vic.....
Contact:

Post by gemracing »

GeminiCoupe wrote:Im in for the headstud kit Darren. Does the block have to be redrilled and tapped?

What about rod bolts?

Nick-
Nick,
No,you won't need to re tap the block,they'll screw straight in..
Darren
Current Car.....


-G180 TX red coupe 9.20@148.6mph on a 26x8.5" tyre and no nitrous 2380lbs with driver
geminiv6turboute
Long Term Member
Posts: 823
Joined: Mon Aug 06, 2007 10:44 pm
Location: Brisbane North Side

Post by geminiv6turboute »

4z head bolts are the same as g series bolts as i have 4 g series bolts in my 4ze1 motor ,the length, washer thread are identical.
15uzu
Regular
Posts: 247
Joined: Mon Jun 13, 2005 11:40 pm
Location: Slacks Creek

Post by 15uzu »

God I love Isuzu's way of thinking :lol: :lol: :lol: :lol: 8)

Darren...how's it progressing with the head stud kit? I remember being told a Nissan kit from RB25 or RB26 might work.
Image
gemracing
Gemini Master
Posts: 885
Joined: Wed May 25, 2005 7:45 pm
Location: Melton,Vic.....
Contact:

Post by gemracing »

15uzu wrote:God I love Isuzu's way of thinking :lol: :lol: :lol: :lol: 8)

Darren...how's it progressing with the head stud kit? I remember being told a Nissan kit from RB25 or RB26 might work.
I have 4 sets so far on order for the head studs,if you want a set and want it in the next order I need to know asap..
Darren
Current Car.....


-G180 TX red coupe 9.20@148.6mph on a 26x8.5" tyre and no nitrous 2380lbs with driver
15uzu
Regular
Posts: 247
Joined: Mon Jun 13, 2005 11:40 pm
Location: Slacks Creek

Post by 15uzu »

how much did they end up being???? I didn't see a price mentioned anywhere.
Image
User avatar
yldgem
Long Term Member
Posts: 859
Joined: Sat May 06, 2006 1:05 pm
Location: WA

Post by yldgem »

15uzu wrote:how much did they end up being???? I didn't see a price mentioned anywhere.
gemracing wrote:Hi guys,
To those interested,I can get ARP head studs(in kit form) to suit a G series engine,I need to know who may be interested,The price is $240 a set.
Regards,
Darren
15uzu
Regular
Posts: 247
Joined: Mon Jun 13, 2005 11:40 pm
Location: Slacks Creek

Post by 15uzu »

gemracing wrote:
15uzu wrote:God I love Isuzu's way of thinking :lol: :lol: :lol: :lol: 8)

Darren...how's it progressing with the head stud kit? I remember being told a Nissan kit from RB25 or RB26 might work.
I have 4 sets so far on order for the head studs,if you want a set and want it in the next order I need to know asap..
Darren
Yeah...I'll have to wait a bit before I get them....wil PM when I'm ready though.
Image
gemracing
Gemini Master
Posts: 885
Joined: Wed May 25, 2005 7:45 pm
Location: Melton,Vic.....
Contact:

Post by gemracing »

Hi guys,
I have 2 sets of these kits in stock left,,the next order is 6 weeks away...
Darren
Current Car.....


-G180 TX red coupe 9.20@148.6mph on a 26x8.5" tyre and no nitrous 2380lbs with driver
Locked