My green TX coupe, 4ZD1T 422rwhp vids page 15
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
thanks guys, nice comments keep me keen!
as far as the wheels go, for a start there's NO chrome in the engine bay other than the wiper bracket so the polished alloy in there suits my simmons nicely haha.
but i DO still have those Volk GR-C 16X7 & 16X8's
i'll probably throw some slicks or drag radials on the simmons and street tyres on the volks. but this car will always be able to wear the OM15's, as that was how i built the car in my head in 1998...
as far as the wheels go, for a start there's NO chrome in the engine bay other than the wiper bracket so the polished alloy in there suits my simmons nicely haha.
but i DO still have those Volk GR-C 16X7 & 16X8's
i'll probably throw some slicks or drag radials on the simmons and street tyres on the volks. but this car will always be able to wear the OM15's, as that was how i built the car in my head in 1998...
GARAGE REDZONE sunshine coast ph 07 54433507
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
coil bracket done, gotta get it polished..
ordered some MSD leads. not long now and i'll be able to fire it up. i think i'll put that on youtube, as there will be a few people amazed that i've actually got it going finally haha
ordered some MSD leads. not long now and i'll be able to fire it up. i think i'll put that on youtube, as there will be a few people amazed that i've actually got it going finally haha
GARAGE REDZONE sunshine coast ph 07 54433507
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
I got the coil mount done, leads made. gotta finish setting up the dizzy still then the ignition system is done!
mounted the piazza oil cooler in front of the rhf wheel. gotta get some nice new hoses made up for it out of some good quality braided line
also pulled box out again today so i can sort out my throw out bearing issue. gotta get a reservoir and line for the hydraulic clutch setup then the clutch/gearbox side of things is done.
yes it does have a fighting chance of being ready for jamboree
mounted the piazza oil cooler in front of the rhf wheel. gotta get some nice new hoses made up for it out of some good quality braided line
also pulled box out again today so i can sort out my throw out bearing issue. gotta get a reservoir and line for the hydraulic clutch setup then the clutch/gearbox side of things is done.
yes it does have a fighting chance of being ready for jamboree
GARAGE REDZONE sunshine coast ph 07 54433507
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
ok oil cooler lines on, engine oil pressure tested, gearbox back in, dizzy/cas setup done, fuel pumps wired, gotta make a bracket for the lift pump and fuel filter, fingers crossed for START UP DAY TOMORROW!
also hunting for a car i can steal the tranny tunnel top out of
also hunting for a car i can steal the tranny tunnel top out of
GARAGE REDZONE sunshine coast ph 07 54433507
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
-
- Regular
- Posts: 602
- Joined: Wed Sep 26, 2007 1:52 am
- Location: Noosa Sunshine Coast QLD
- Contact:
redzone (coxy) wrote:ok oil cooler lines on, engine oil pressure tested, gearbox back in, dizzy/cas setup done, fuel pumps wired, gotta make a bracket for the lift pump and fuel filter, fingers crossed for START UP DAY TOMORROW!
also hunting for a car i can steal the tranny tunnel top out of
hey you know i have a dead shell here you can take the trans tunnel out of if ya need it
Cheers
Matt
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
lol yeah i want something with a long and narrow opening so i have easy access to get the box in and out. also for top loader clearance aswell!
GARAGE REDZONE sunshine coast ph 07 54433507
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0
1975 TX coupe 4ZD1 efi turbo 10.787 @ 123/128
1977 TC Fashion Pack sedan draw through turbo
1984 TG PF60E dohc Group A racecar
1984 TG Panelvan
2006 Crewman SS 6.0