Nissan VG30ET V6 Turbo, TF Gemini, went to the dyno!
nup, unless you use an adapter plate, the t5 box uses a separate bell housing to bolt to the Nissan engine, where as the bell housing on the Nissan boxes is part of the gearbox. But I cant see why you cant just use an auto out of a Nissan 300zx, navara or a pathfinder? I'm sure there as good as a th700.
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
Might be best to go to the wreckers and put a nissan auto next to a trimatic, see what the differences are.
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
Yeah head gasket has blown again, yep punching it.
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
Powder coated the rocker covers crinkle black.
Covers again.
Side shot of the pos.
Gutted the inside of the upper plenum for better upper rpm flow. Had a aluminum plate welded onto the top. This and the bottom will also be ceramic coated.
Relocated the throttle body to the side, changed from the stock 52mm to a KA24 60mm Throttle body.
Inside the plenum.
Some axle snapping Yokohama A048 semi slicks, 225/50/15.
Bought 12 Bosch 035 injectors for $5each, 392cc at 3bar.
New headers I made, just need to finish smoothing them out and welding some flanges to the ends. Then have them ceramic coated.
FJO Wide band kit, laptop data logging etc.
B&M Fuel pressure gauge, blackout style.
The only thing I need to get now is a new turbo, Looking at a Garrett GT3582r .82 exhaust housing, internal waste gate. Or similar aka gt3540r or xr6 turbo. So if you have a good one pm me!
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
Well I just blew the head gasket for sure, well water out the exhaust is a good sign its gone, still drove it home.
f*#k me it flew all over the place in 3rd gear, 4th gear and pop goes the radiator hose oh well. I'm thinking the deck of this block is warped. 3rd headgasket and I only connected up the turbo last night and only 7psi so meh.
f*#k me it flew all over the place in 3rd gear, 4th gear and pop goes the radiator hose oh well. I'm thinking the deck of this block is warped. 3rd headgasket and I only connected up the turbo last night and only 7psi so meh.
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
Stock 9.1 comp short block, I also Remapped the ignition table for "boost".
Stock boost 7psi. Cooler not mounted cos im too lazy atm to order silicone hoses.
Thrashed it till the tyres blew and the temp guage hardly budged, unlike before.
http://www.youtube.com/watch?v=XW0UdyfvflM
Stock boost 7psi. Cooler not mounted cos im too lazy atm to order silicone hoses.
Thrashed it till the tyres blew and the temp guage hardly budged, unlike before.
http://www.youtube.com/watch?v=XW0UdyfvflM
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
-
- New Member
- Posts: 42
- Joined: Thu Jul 23, 2009 6:44 pm
- Location: penrith
Nup, only had to move the battery and cut a new hole for the shifter.
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
-
- New Member
- Posts: 42
- Joined: Thu Jul 23, 2009 6:44 pm
- Location: penrith
stockgemils1
I did rotate the starter motor slightly so the solenoid on it would clear, you might have to buy an adjustable one.
I did rotate the starter motor slightly so the solenoid on it would clear, you might have to buy an adjustable one.
VG30ET + white gemini wagon....
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U
6.0L Gen4 + T56 Powered 64 Chev Belair.
I like burnouts.
http://www.youtube.com/watch?v=XW0UdyfvflM
http://www.youtube.com/watch?v=iXI-vFI-E3U