sandy's TX coupe 4zc1 149kw

sandy · Post by **sandy** » Tue Jan 24, 2012 6:54 pm

so reposting this in here
ceebs rewriting it all so heres the link to the start of it
http://www.ozgemini.com/forums/non-tech ... hp?t=40328

took the front and back windows out the other day

sandy · Post by **sandy** » Fri Jan 27, 2012 4:07 pm

done a little more work on it in the last couple of days
taken the front cross member out of the blue one that has the toeing hooks on it to go in, taken off the number plate holder, taken off the rear supoort thats in the boot, taken off the boot lid and i changed over the bonnets

BackToTheGem · Post by **BackToTheGem** » Fri Jan 27, 2012 4:17 pm

Hi Sandy,

Might just be the pics I'm looking at but it looks like the box section that ties the a pillar to your front guard is missing on the driver's side. It's an important bit section you don't want missing.

Might just be the photos though (or I'm blind).

Bottom of your a pillar where it meets the sill shouldn't have a gaping hole like that either - unless you've cut rust out of there already. If you haven't make sure you plate it back up.

sandy · Post by **sandy** » Fri Jan 27, 2012 11:45 pm

yeah thanks for that

i dropped it off to the pannel beaters tonight and he is going to fix it all up and change the front end back to the tx as well

sandy · Post by **sandy** » Thu Feb 02, 2012 2:14 pm

picked up the bumbers from the chromers today

will take a photo and upload it hopefully tomorrow

sandy · Post by **sandy** » Mon Mar 12, 2012 2:21 pm

Went to the panel beaters house today and it's lookibg to be back here in the next couple of weeks

sandy · Post by **sandy** » Sun Apr 01, 2012 4:34 pm

bought a tacho cheap the other day so put it in my s%*tty gemini

my coupe on the other hand is still at the panel beater, recons wont have it back till after easter atleast

sandy · Post by **sandy** » Mon May 14, 2012 7:29 pm

so bit of an up date, this happened 2 weeks ago

on a good note, should be picking up the coupe this week and taking it to the painter

LOK15 · Post by **LOK15** » Mon May 14, 2012 8:09 pm

So who or what did you hit?

sandy · Post by **sandy** » Mon May 14, 2012 8:21 pm

i ran up the ass of a ve....
he had tiny dint where the chaise rail hit him

LuvmyTD · Post by **LuvmyTD** » Mon May 14, 2012 8:40 pm

1 less gem on the road :/. Hope you were alright man, hope you had insurance? The same thing happened to me 7weeks ago (I was passenger in a mates car, we were turning right and got hit from behind at 100km/h) I on the other hand am sueing the guy that hit us... Hope you dont get sued :S

sandy · Post by **sandy** » Mon May 14, 2012 8:53 pm

yes unfortuantley. im fine thanks
only 3rd party so probably wont make a claim
nah i dont think ill get sued just have to pay the claim

sandy · Post by **sandy** » Wed May 16, 2012 9:44 pm

picked up the coupe from panel beaters house today
much all rust cut out he found, driver side floor pan replace, and put the tx front end back on it
now it needs some paint and i can start putting it back together

GEMWRC · Post by **GEMWRC** » Thu May 17, 2012 12:07 am

thats lovely !!! shame about your other one . glad your ok looked like a big hit

sus20b · Post by **sus20b** » Thu May 17, 2012 12:59 am

keep these pic's coming mate,sorry bout ur gem.

OzGemini.com

sandy's TX coupe 4zc1 149kw

sandy's TX coupe 4zc1 149kw

update and pics

pic's