out with the old poo in with the good poo.
got a mildly stupid paint job in mind
couple wall taps pulled out,
Rust repairs - both rear lower 1/4s, 2 lower doors, both A pillars behind front 1/4s, both lower front 1/4s, both front floors and the boot floor
The Poo
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
- Holden202T
- Regular
- Posts: 492
- Joined: Sun Mar 16, 2008 7:47 pm
- Location: Tenambit, NSW.
- Contact:
-
- Long Term Member
- Posts: 1597
- Joined: Tue Jul 25, 2006 11:09 pm
- Location: Brisbane:- 1.5bar above you
those braces you fab'd for behind the guard, did you drill a little hole in the bottom to stop the rust happening again...
its what I did and sprayed a little fish oil up inside it, thats what I did the first time...
but then I re did it with 25x25 box steel instead
its what I did and sprayed a little fish oil up inside it, thats what I did the first time...
but then I re did it with 25x25 box steel instead
Thats Right Im a Long Term Member
WASTEGATES - WASTE 8S
IF YOU WANNA FLY, GIVE IT MORE P.S.I
WASTEGATES - WASTE 8S
IF YOU WANNA FLY, GIVE IT MORE P.S.I
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
cant take credit for the work. a mate of mine did it all. all sheet metal work, no replacement panels were used.
if anyone wants work done let me know and i can pass on his details.
as for the hole, i assume so, but ill have the guards of for paint so i can do it then if needed.
if anyone wants work done let me know and i can pass on his details.
as for the hole, i assume so, but ill have the guards of for paint so i can do it then if needed.
"No thank you, Turkish; I'm sweet enough."
-
- Long Term Member
- Posts: 1286
- Joined: Thu May 29, 2008 6:17 pm
- Location: Baulkham Hills (NSW)
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact: