TD Panelvan - Progress?
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
TD Panelvan - Progress?
Got this last night. Got afew thing to do, could use with some new paint for one.
Here's some pics from tonight when i cleaned it, will get some more tomoro arvo during the day and when its dry.
This was taken just after a huge hunsmen crawled out of my boot
Will get some better pics up, as these where taken from my phone.
Here's some pics from tonight when i cleaned it, will get some more tomoro arvo during the day and when its dry.
This was taken just after a huge hunsmen crawled out of my boot
Will get some better pics up, as these where taken from my phone.
Last edited by BLK-TDPANO on Fri Mar 22, 2013 6:30 pm, edited 25 times in total.
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
yea, im pretty keen to get into it
First things first tho, need to get a RWC for it.
So gettin that checked over on Tuesday, but shouldnt need much, if anything, as it got one 4months ago.
Also came with a spare TD Wagon with another G180 that has apparently been reco'd. so might give that a drive and see that engine feels better.
Also came with alot spares, so might get onto them and paint them up pretty soon. No idea of colour just yet.
First things first tho, need to get a RWC for it.
So gettin that checked over on Tuesday, but shouldnt need much, if anything, as it got one 4months ago.
Also came with a spare TD Wagon with another G180 that has apparently been reco'd. so might give that a drive and see that engine feels better.
Also came with alot spares, so might get onto them and paint them up pretty soon. No idea of colour just yet.
-
- n00b
- Posts: 17
- Joined: Mon Aug 18, 2008 9:21 pm
- Location: bittern
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
-
- Regular
- Posts: 123
- Joined: Tue Aug 12, 2008 6:48 pm
- Location: Bittern|vic
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
-
- Regular
- Posts: 123
- Joined: Tue Aug 12, 2008 6:48 pm
- Location: Bittern|vic
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
-
- Regular
- Posts: 123
- Joined: Tue Aug 12, 2008 6:48 pm
- Location: Bittern|vic
ahhhh that sucks! i got my roady nice and easy! thanks to some contacts:D lol
hope it dozint cost you to much to get it. If you need any help or parts i might be able to give you a hand.
Once i get me license in October def go 4 some cruses.
ino theirs a white gem getting around morno as well...
hope it dozint cost you to much to get it. If you need any help or parts i might be able to give you a hand.
Once i get me license in October def go 4 some cruses.
ino theirs a white gem getting around morno as well...
discreetly turbo... just quietly
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
-
- Regular
- Posts: 634
- Joined: Sun Dec 09, 2007 4:07 pm
- Location: Byron Bay, NSW
this is my list i got for the RWC inspection:
Sunvisors to be fitted (got some, just have to install them)
extensive oil leaks to be rectified (rocket cover gasket picked up today)
Rear number plate mounting
Rear number plate illumination (fit new bumper and install light and it'll work)
Replace front engine mout (got another motor im thinking about putting in, so can swap the mounts when i do that)
Rust repair need in front left and right floor needs to be welded in, not fiber glassed) (Doner car has good floors)
Tow bar holes to be sealed
Exhaust system to be raised
exhaust main muffler to be replaced (good exhaust on doner car)
Speedo cable to be secured under car
right front lower indicator lense to be replaced
front number plate to be secured to vehicle
alternator to operate (have good one on doner car)
Engine emmision equipment to be there and connected (stove pipe and plate are both missing)
The inspection was incomplete - the car has not been road tested, hasnt checked the interior as of yet, but said i can come back sometime and book the car in and it wont cost me anything.
So iv got most of it under controll except for the welding.
Sunvisors to be fitted (got some, just have to install them)
extensive oil leaks to be rectified (rocket cover gasket picked up today)
Rear number plate mounting
Rear number plate illumination (fit new bumper and install light and it'll work)
Replace front engine mout (got another motor im thinking about putting in, so can swap the mounts when i do that)
Rust repair need in front left and right floor needs to be welded in, not fiber glassed) (Doner car has good floors)
Tow bar holes to be sealed
Exhaust system to be raised
exhaust main muffler to be replaced (good exhaust on doner car)
Speedo cable to be secured under car
right front lower indicator lense to be replaced
front number plate to be secured to vehicle
alternator to operate (have good one on doner car)
Engine emmision equipment to be there and connected (stove pipe and plate are both missing)
The inspection was incomplete - the car has not been road tested, hasnt checked the interior as of yet, but said i can come back sometime and book the car in and it wont cost me anything.
So iv got most of it under controll except for the welding.
-
- Regular
- Posts: 747
- Joined: Sat May 28, 2005 5:31 pm
- Location: Melbourne