F.S 12A /13B Turbo & N/A Rotary Conversion Kits
Here is Johnny's coupe, the bofore shot. He is going with the 13B conversion, as soon as it is completed i will post pics up.
Here is the donor car.
Here is the donor car.
Last edited by SLIMER on Fri Oct 09, 2009 12:03 am, edited 5 times in total.
Last edited by SLIMER on Fri Oct 09, 2009 12:01 am, edited 1 time in total.
-
- New Member
- Posts: 26
- Joined: Fri Aug 26, 2005 7:32 pm
- Location: north side brisbane
Slowly getting there, will get some more pics as i progress.
Last edited by SLIMER on Thu Oct 08, 2009 11:52 pm, edited 1 time in total.
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
depends if you what your after (ported, big turbo, stock turbo etc etc)Gene FJ20DEBT wrote:what are the drive in drive out 13b conversions worth slimer?
this one is around $3000 but he already had alot of parts from the donor car (motor/box, radiator), but sold alot of parts off it ($600 for the rims, and about $300 in other parts so all up i think it has only cost him about $4000 drive in drive out.
(if someone supplies "everything needed" for the conversion...parts wise (motor, box, radiator, fuel system, exhaust, fuel pumps, hose clamps, tail shaft etc etc) i supply the kit for $900 and only charge $8-900 labour to fit the lot)
If something is required/requested when fitting that is extra (Say you supply an engine and have not seen it running etc and i put it in and it has a massive oil leak or needs a clutch etc, then im not going to fix it for free however i will help you out when ever/where ever i can (ill sell you the parts needed dirt cheap if i have them in stock).
Once this is all done i will post up an itemised list of everything that was paid for with prices.
(it will be a fairly long list, alot of little things but in the end they are what add up at the end of the day).
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- New Member
- Posts: 26
- Joined: Fri Aug 26, 2005 7:32 pm
- Location: north side brisbane
was too rusty to bother fixing unless you like that model car.
It wasnt even a complete car either, if it was a full complete car i would have sold more parts which means more money for the owner (i dont mind finding a donor car and stripping it for free here for them if it means they are getting a good runner, that way it works out well for both the owner and i) nothing worse than putting in an engine etc and have it not run properly or at all.
This one had even had a mircotech MT4 (fuel only) computer, exhaust etc everything else was stock though, still going to put out over 200rwhp though..
It wasnt even a complete car either, if it was a full complete car i would have sold more parts which means more money for the owner (i dont mind finding a donor car and stripping it for free here for them if it means they are getting a good runner, that way it works out well for both the owner and i) nothing worse than putting in an engine etc and have it not run properly or at all.
This one had even had a mircotech MT4 (fuel only) computer, exhaust etc everything else was stock though, still going to put out over 200rwhp though..
Like father, like son Steve.
He's done a pretty good job there.
Just be careful mate, he want a cut of the profit...
He's done a pretty good job there.
Just be careful mate, he want a cut of the profit...
MY PRIDE AND JOY - "THA ROTOR COUPE"