STREET WISE PERFORMANCE: UPDATE 6/1/2014

Have you got a great deal to offer all the members of OzGemini? If so Post the details here.
This is not for Private "for sale" add's
macca_loto
Long Term Member
Posts: 1060
Joined: Thu May 19, 2005 1:39 pm
Location: The Gul, VIC

Post by macca_loto »

Ladies and Gentlemen boys and girls i have the following quantites of flanges for sale! All flanges are 10mm Mild steel (250Mpa) and are precision laser cut to the highest quality. Get in quick i dont expect these to last long!

Twincam exhaust flange x10 $40each plus post
G Series exhaust flange x10 $37each plus post
T2 Turbo flange x10 $15 each plus post
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"

TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
macca_loto
Long Term Member
Posts: 1060
Joined: Thu May 19, 2005 1:39 pm
Location: The Gul, VIC

Post by macca_loto »

Havinng a clean out.

t2 Flanges. $10each
Gemini exhaust manifold flanges $25 each
Custome plenums to suit VL throttle body only. ONLY $200
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"

TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
macca_loto
Long Term Member
Posts: 1060
Joined: Thu May 19, 2005 1:39 pm
Location: The Gul, VIC

Post by macca_loto »

Hey everybody. Havent been in my advert for a while. Been flat out pumping out jobs.

If anyone is after anything i stock, welded or custom built, i have a gap for the next 4 weeks.
Quality of work is the best around, better than show standard but at prices affordable to everyone!
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"

TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
AdrenalFixa
n00b
Posts: 18
Joined: Wed Jan 07, 2009 9:01 pm
Location: Scarborough Perth - GEMSWA!

Post by AdrenalFixa »

Do you sell t3 flanges made out of mild steel?

and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...

cheers
Des
Jenova
Chatterbox
Posts: 66
Joined: Thu Dec 07, 2006 8:20 pm
Location: Perth

Post by Jenova »

AdrenalFixa wrote:Do you sell t3 flanges made out of mild steel?

and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...

cheers
Des
dez ive got one here if ya wanna take a look mine was made to suite xf tb should fit on 4z and g series runners
BAD TRADES: CPT_sniper, False info on the product + product is f*#cked, waste of money, didnt even offer refund
macca_loto
Long Term Member
Posts: 1060
Joined: Thu May 19, 2005 1:39 pm
Location: The Gul, VIC

Post by macca_loto »

AdrenalFixa wrote:Do you sell t3 flanges made out of mild steel?

and also, those plenums for $200 your selling to fit vl throttle bodies, are they 4z and g series?...

cheers
Des
You have to ue 4z runners to inject a g series anyway. so yes. They fit either rodeo or piazza lower runners.
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"

TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
gemini90
New Member
Posts: 39
Joined: Wed Jan 31, 2007 8:31 pm
Location: MELBOURNE

Post by gemini90 »

Hi strreet wise performance i was jst woundering if u hve a email address jst intrested in buying 1 of ur fuel surge tanks thanks
macca_loto
Long Term Member
Posts: 1060
Joined: Thu May 19, 2005 1:39 pm
Location: The Gul, VIC

Post by macca_loto »

Just an update for all you members out there. Have been pretty busy over the last 3-4 months turning out alot of work. My spare time is filling up fast with work to be done so if your after anything to be done, pm me straight away and will out a time for when i can fit your next job in!
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"

TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
KAMZ
n00b
Posts: 10
Joined: Tue Feb 13, 2007 9:56 am
Location: Perth

Re: STREET WISE PERFORMANCE: UPDATE 8/8/09

Post by KAMZ »

Hi Mate,
How much for a plenum like the one below to suit sohc g180 shipped to perth???


Image

Image
1979 TD coupe with TG front end, SOHC G180, Single Weber carby, Lukey Extractors, ACL pistons, over sized valves, Ported and Polished head, stage 2 cam, balanced bottom end, 2.5" exhaust.
macca_loto
Long Term Member
Posts: 1060
Joined: Thu May 19, 2005 1:39 pm
Location: The Gul, VIC

Post by macca_loto »

Still here people, been flat out doing custom fabrication work. Looking for a few small projects to take on to fill in between the big ones i have.

Also still have 5x G series exhaust flanges Will do them for $30 each plus post untill they sell out.
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"

TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
Tonysaustin
Posts: 0
Joined: Sun Feb 05, 2012 8:52 pm
Location: Central victoria

Post by Tonysaustin »

macca_loto wrote:Still here people, been flat out doing custom fabrication work. Looking for a few small projects to take on to fill in between the big ones i have.

Also still have 5x G series exhaust flanges Will do them for $30 each plus post untill they sell out.

Hello there

Do you still have g series exhaust flanges available.
Also need a t25/28 flanges.

Regards tony
sammy
New Member
Posts: 24
Joined: Sat Dec 01, 2007 9:00 am
Location: Adelaide

Post by sammy »

How much for a stainless steel power steering resivour. Radiator overflow tank and a wiper washer tank all in brushed stainless?

If you could send me a rough price.

Thanks
Sam
User avatar
Jonno
Korean Jesus
Posts: 2370
Joined: Tue Jul 25, 2006 5:28 pm
Location: Canberra. Where the Fast Geminis live
Contact:

Post by Jonno »

Still in the game?
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
Image
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
macca_loto
Long Term Member
Posts: 1060
Joined: Thu May 19, 2005 1:39 pm
Location: The Gul, VIC

Post by macca_loto »

Sure am still in the game, dont own a gemini these days but still doing a tonne of custom work, building LS manifolds airbagging mini trucks you name it ill fab it.
STREET WISE PERFORMANCE ~ "Coming to a suburb near you"

TG- Latest Project plans not sure
WH Caprice daily driver- Tune, Exhaust, auto, stall, diff gears, Valve springs, U/Dirve pulley, OTRCAI 12.7@ 108 MPH
F3ARED
Moderator
Posts: 2705
Joined: Wed Sep 28, 2005 11:55 pm
Location: Melbourne, Victoria

Post by F3ARED »

Oi nugget, dont happen to have a DOHC inlet flange do ya?
Previously GeminiCoupe/GeminiRollingShell/SCAR3D/Jonnoisac#nt

78 TD Gemini Sedan - R.I.P
81 TE Gemini Sedan
Post Reply