If you can't get to it then remove the brake master assembly so you can clean the area up.
Then just rebleed after. The brake fluid that was left there obviously ate into the paint and bubbled it and exposed the metal surface to oxygen then started to rust.
Search found 523 matches
- Sat Dec 11, 2010 8:11 pm
- Forum: Noobs Playground
- Topic: Remove master cylinder/vac
- Replies: 3
- Views: 1033
- Sat Dec 11, 2010 8:02 pm
- Forum: Gemini Chat
- Topic: EBAY radiators
- Replies: 35
- Views: 3699
We all talk about cooling efficiency of a radiator that is in a gemini? For the price of the alloy units on ebay it is a bargain. They are a hell of a lot lighter than the copper units also. I just put a 50mm 4core alloy rad from ebay in my hilux after 3 attempts of repairing a top tank leak on the ...
- Sat Dec 11, 2010 7:54 pm
- Forum: Gemini Chat
- Topic: g161z
- Replies: 2
- Views: 618
- Sun Aug 08, 2010 9:37 pm
- Forum: Gemini Chat
- Topic: no spark. msd is good. all fixed!
- Replies: 12
- Views: 3298
all ok now. When I first bought the kit it wasn't in a petronix box. However when I read the back of the ignitor it is indeed a Petronix Ignitor with the part number on top. The metal ring was a little rusty so I cleaned that up. Pulled the ignitor out and cleaned the magnet face. Refitted. The airg...
- Sun Aug 08, 2010 9:17 am
- Forum: Gemini Chat
- Topic: no spark. msd is good. all fixed!
- Replies: 12
- Views: 3298
- Sat Aug 07, 2010 8:48 pm
- Forum: Gemini Chat
- Topic: no spark. msd is good. all fixed!
- Replies: 12
- Views: 3298
no ECU. just carby setup with msd 6a. sorry I didn't clear all that up.
photos of dizzy are in viewtopic.php?t=17093&start=0
photos of dizzy are in viewtopic.php?t=17093&start=0
- Sat Aug 07, 2010 8:07 pm
- Forum: Gemini Chat
- Topic: no spark. msd is good. all fixed!
- Replies: 12
- Views: 3298
But this should still create a spark at the spark plug correct? I am getting no spark when disconnecting lead at plug and grounding near tappet cover or no spark coming from coil when cranking. Even if the timing is out. The trigger is exactly the same as a petronix ignitior kit but just a different...
- Sat Aug 07, 2010 5:27 pm
- Forum: Gemini Chat
- Topic: no spark. msd is good. all fixed!
- Replies: 12
- Views: 3298
Ok have done some diagnosing today. Have had a look at wiring diagrams, etc. I know the wiring is all fine because it has been running for 2 years now and I haven't touched anything. Anyway have a read of this: http://www.msdignition.com/page.aspx?id=3206 I use the white wire trigger as I run a petr...
- Sat Aug 07, 2010 9:17 am
- Forum: Gemini Chat
- Topic: no spark. msd is good. all fixed!
- Replies: 12
- Views: 3298
- Fri Aug 06, 2010 9:44 pm
- Forum: Gemini Chat
- Topic: no spark. msd is good. all fixed!
- Replies: 12
- Views: 3298
no spark. msd is good. all fixed!
Hey does anyone know if the msd 6a has a fuse inside at all. had a browse on the tech forum on msd but didn't find much. Gem getting sold on wednesay and went to start last night from cold. It fired up and spluttered a bit like normal then stalled. Tried to restart and it wouldn't. i thought i flood...
- Fri Aug 06, 2010 9:22 pm
- Forum: Gemini Chat
- Topic: brake calipers
- Replies: 23
- Views: 5584
I rebuilt my calipers 2 years ago the exact same way. Replaced boot seals, piston seals and the o-rings. My calipers looked worse than those. Stuff fell out everywhere. Had to use a screwdriver to wedge a heap of crap out of the lines in the caliper. And after two years they haven't leaked at all. H...
- Wed Apr 28, 2010 5:43 pm
- Forum: Gemini Chat
- Topic: White exhaust valves
- Replies: 5
- Views: 1609
- Mon Apr 26, 2010 8:43 pm
- Forum: Gemini Chat
- Topic: White exhaust valves
- Replies: 5
- Views: 1609
I read an article on reading spark plugs and the plugs are quite black around the top ring. They are good heat range via the strip on the earth. However plugs are 10,000km old. How and what rev range would that be lean? Is it possible idle is good but main/secondary jets too lean? Do the valves look...
- Mon Apr 26, 2010 12:20 pm
- Forum: Gemini Chat
- Topic: White exhaust valves
- Replies: 5
- Views: 1609
White exhaust valves
Hey had to pull my head off to stamp the bloody engine number on for a rwc. When they decked the block ages ago the shaved it off and I put it back in not thinking or seeing it fully shaved off. The head tapers over the block face where the number sits and couldn't get the stamp direct on it. So too...
- Sat Mar 06, 2010 10:20 pm
- Forum: Gemini Chat
- Topic: stupid things....
- Replies: 24
- Views: 3829
Rebuilt the front calipers in the gem. Regreased the bearings as well, etc. new rotors. Put the calipers back on. Bleed the brakes went to drive it and the rears would lock up and the pedal would go to the floor. Went through litres of brake fluid and hours of bleeding brakes until I had a look and ...