Code: Select all
Just put this here cos i needed to host all the pics in order for someone to look at from another forum as there forum dosnt alow excesive pics
mould of the rear fire wall
out lines
trimed to shape
building the frame up of the fiber glass base
inside the amp rack is trimmed up now in black vynil....
cooling fans
[/quote]
lighting for the amp rack
[/quote]
remote wire froom the head unit is wired to a relay.. relay turns on the 2 cooling fans the LEDs and the amp...
led is on constant when ever the head unit is turned on
this is the access hole so that all the dials on the amp can be adjusted with out having toremove the amp to do so..
this end will be covered with a cover trim to hid the hole ... it will have 2 small grils also over each of the fans for cooling
heres a shot of the 2 bolts i fibber glassed in with big 40x40 washers to hold the install to the floor
all the wiring going into the amp rack
heres where i have stetched blue fleece over the whole fram3 and painted on as much resin as possible
[/quote]
after it had set i cut a hole in the back of the encloses and lined the inside of the section that houses the subwoofer with 4 layers of matting then sealed up the access hole with 2-3 layers from the inside