Diff Question
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- Regular
- Posts: 290
- Joined: Wed Jun 22, 2005 9:11 pm
- Location: brisbane, petrie
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- Long Term Member
- Posts: 4173
- Joined: Mon May 23, 2005 8:33 pm
thats easy, rose joints, the suspension geometry wont vary in any of its travel.
the major downside to that is it will transfer all the noise and vibration into the suspension mounts and chassis, causing wear in other places. So they are only really suitable for purpouse built cars, eg drag, drift, race
I would go with rubber (or urethane) for a street driven car.
the major downside to that is it will transfer all the noise and vibration into the suspension mounts and chassis, causing wear in other places. So they are only really suitable for purpouse built cars, eg drag, drift, race
I would go with rubber (or urethane) for a street driven car.
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
- Rodeobob
- Long Term Member
- Posts: 4740
- Joined: Fri Aug 05, 2005 12:15 am
- Location: Sunshine North, Melbourne
Gene you could also look at intergrating the sway bar and top arm to diff arangment into one bracket welded to the axle tube. That would tidy things up somewhat. U bolts look all very rural.Gene FJ20DET wrote:
You still planning on two top arms???
Any updates from NZ?????
Bob.
Piazza for sale, black, manual, in fair condition with heaps of parts $3500 (parts not for sale seperately)
DO NOT PRIVATE MESSAGE ME FOR ASSISTANCE, IM AN ASSHOLE YOU WILL GET AN EAR BASHING, ASK IN THE GENERAL FORUM.
DO NOT PRIVATE MESSAGE ME FOR ASSISTANCE, IM AN ASSHOLE YOU WILL GET AN EAR BASHING, ASK IN THE GENERAL FORUM.
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
- Project Circuit
- New Member
- Posts: 41
- Joined: Tue Jun 28, 2005 10:39 pm
- Location: Sydney N.S.W
Please excuse if this has already been re-covered.
But Gene made mention that Ladder/Traction bars are illegal for road use.
In actual fact they are not.
Law stipulates that the use of traction bars are permitted for use, ensuring that the action of the traction bars will not cause binding or considerable amounts of stress on the spring, assissting control arms and their associated pick-up points.
But Gene made mention that Ladder/Traction bars are illegal for road use.
In actual fact they are not.
Law stipulates that the use of traction bars are permitted for use, ensuring that the action of the traction bars will not cause binding or considerable amounts of stress on the spring, assissting control arms and their associated pick-up points.
What is this?........ A school for ants??
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact:
-
- Regular
- Posts: 532
- Joined: Tue Nov 08, 2005 5:47 am
- Location: Northland New zealand
-
- Supreme Overlord
- Posts: 9056
- Joined: Sat May 14, 2005 10:32 pm
- Location: Brisnyland, QLD AKA: NISMOgemini
- Contact: