Australia wide Modification guidelines dotar

Technical Disscusion Forum will be used for in depth threads that are moved here by a mod/admin member.... everyone is welcome to add their input, but only on topic replys
Post Reply
User avatar
kizza
Regular
Posts: 628
Joined: Wed Aug 10, 2005 9:20 pm
Location: sunny coast

Australia wide Modification guidelines dotar

Post by kizza »

here are a few links for those who like to do the modifications themselves.


main download page:
http://www.dotars.gov.au/transport/safe ... _ncop.aspx

newly updated page with working links
Last edited by kizza on Mon Jun 12, 2006 7:12 pm, edited 2 times in total.
User avatar
kizza
Regular
Posts: 628
Joined: Wed Aug 10, 2005 9:20 pm
Location: sunny coast

Post by kizza »

it applys to everyone around australia as of feb 2006. it is the modification bible and is worth well over $100 to buy from the local transport agency.
Last edited by kizza on Mon Jun 12, 2006 7:13 pm, edited 1 time in total.
FieldEffect
Was dangerous_dave
Posts: 2032
Joined: Mon May 30, 2005 12:38 am
Location: MEL

Post by FieldEffect »

Those links dont work anymore
Gemini: Light weight, low cost RWD automotive platform.
guru
n00b
Posts: 13
Joined: Fri May 27, 2005 4:43 pm
Location: Mt Tamborine Qld

Post by guru »

These mod codes are based off the Qld system that is currently in place and are still in the draft stage.Spoke to a guy from transport the other day and he says that they probably wont be in till 07 at least.
Bits & Pieces
BANNED
Posts: 268
Joined: Thu Jun 22, 2006 3:40 pm
Location: Australia Wide
Contact:

Post by Bits & Pieces »

Last edited by Site Admin, on August 23, 2006
Last edited by Bits & Pieces on Wed Aug 23, 2006 7:34 pm, edited 1 time in total.
User avatar
pistonbroke
Regular
Posts: 690
Joined: Wed Jun 21, 2006 10:25 pm
Location: Mexico

Post by pistonbroke »

EPA testing costs about $2500 I think.
Bits & Pieces
BANNED
Posts: 268
Joined: Thu Jun 22, 2006 3:40 pm
Location: Australia Wide
Contact:

Post by Bits & Pieces »

Last edited by Site Admin, on August 23, 2006
Last edited by Bits & Pieces on Wed Aug 23, 2006 7:38 pm, edited 2 times in total.
User avatar
pistonbroke
Regular
Posts: 690
Joined: Wed Jun 21, 2006 10:25 pm
Location: Mexico

Post by pistonbroke »

Were did you get that info.Thats not what I was told.
I was told that it stillneeds to carry the same pollutin gear.eg,air pump,pcv, canister ect.
I could be wrong,I'll try and find some paper work on it for ya bits.
checkaz
n00b
Posts: 4
Joined: Thu Apr 08, 2010 7:09 am
Location: nsw

Sr20

Post by checkaz »

Hay there doing an sr20 convo just wondering at what you's run your engine degrees at mine is siting at 6.7 but have been told it needs to be closer to 3 other wise I will be getting noise and vibration from the uni wondering an one raised there tunel to fix the prob have cut down steering rack and still running standed sump everything fitting nice just the degrees
timmstg
n00b
Posts: 3
Joined: Tue Jun 12, 2012 6:48 pm
Location: park ridge south

Post by timmstg »

Post Reply