here are a few links for those who like to do the modifications themselves.
main download page:
http://www.dotars.gov.au/transport/safe ... _ncop.aspx
newly updated page with working links
Australia wide Modification guidelines dotar
Australia wide Modification guidelines dotar
Last edited by kizza on Mon Jun 12, 2006 7:12 pm, edited 2 times in total.
it applys to everyone around australia as of feb 2006. it is the modification bible and is worth well over $100 to buy from the local transport agency.
Last edited by kizza on Mon Jun 12, 2006 7:13 pm, edited 1 time in total.
-
- Was dangerous_dave
- Posts: 2032
- Joined: Mon May 30, 2005 12:38 am
- Location: MEL
-
- BANNED
- Posts: 268
- Joined: Thu Jun 22, 2006 3:40 pm
- Location: Australia Wide
- Contact:
Last edited by Site Admin, on August 23, 2006
Last edited by Bits & Pieces on Wed Aug 23, 2006 7:34 pm, edited 1 time in total.
- pistonbroke
- Regular
- Posts: 690
- Joined: Wed Jun 21, 2006 10:25 pm
- Location: Mexico
-
- BANNED
- Posts: 268
- Joined: Thu Jun 22, 2006 3:40 pm
- Location: Australia Wide
- Contact:
Last edited by Site Admin, on August 23, 2006
Last edited by Bits & Pieces on Wed Aug 23, 2006 7:38 pm, edited 2 times in total.
- pistonbroke
- Regular
- Posts: 690
- Joined: Wed Jun 21, 2006 10:25 pm
- Location: Mexico
Sr20
Hay there doing an sr20 convo just wondering at what you's run your engine degrees at mine is siting at 6.7 but have been told it needs to be closer to 3 other wise I will be getting noise and vibration from the uni wondering an one raised there tunel to fix the prob have cut down steering rack and still running standed sump everything fitting nice just the degrees