How to Convert an Auto Gemini to a Manual

Drivetrain articles (gearbox, torque tube, diff)
Rotarykiwi
New Member
Posts: 37
Joined: Mon Mar 15, 2010 3:09 pm
Location: Elimbah

Post by Rotarykiwi »

what torque setting does the fly wheel need to be done up to? cheers guys :)
MR ZZZ
Chatterbox
Posts: 54
Joined: Tue Oct 31, 2006 9:25 pm
Location: Hills, South Oz

Post by MR ZZZ »

approx 69 ft/lbs of 93nm. :wink:
The Platypus has the brain of a Dolphin, and can be seen driving a forklift through it's habitat of kelp..........
MR ZZZ
Chatterbox
Posts: 54
Joined: Tue Oct 31, 2006 9:25 pm
Location: Hills, South Oz

Post by MR ZZZ »

MR ZZZ wrote:approx 69 ft/lbs of 93nm. :wink:
or, not of. my bad. :oops:
The Platypus has the brain of a Dolphin, and can be seen driving a forklift through it's habitat of kelp..........
kizza mcgrath
Regular
Posts: 145
Joined: Mon Oct 12, 2009 8:39 pm
Location: Bendigo

Post by kizza mcgrath »

What's the answer with the pedels ?? Example: will tf pedels fit a tx ?
MR ZZZ
Chatterbox
Posts: 54
Joined: Tue Oct 31, 2006 9:25 pm
Location: Hills, South Oz

Post by MR ZZZ »

kizza mcgrath wrote:What's the answer with the pedels ?? Example: will tf pedels fit a tx ?
G'day kizza, I just did an auto to manual conversion on my TD coupe. I used TG sedan Brake and clutch pedals including the mount that bolts to the fire wall. Not sure on TX unfortunately. Hope this helps.
The Platypus has the brain of a Dolphin, and can be seen driving a forklift through it's habitat of kelp..........
kizza mcgrath
Regular
Posts: 145
Joined: Mon Oct 12, 2009 8:39 pm
Location: Bendigo

Post by kizza mcgrath »

Yeah cheers for the prompt reply, I have a feeling that it's a little off center coz they feel weird compared to my other manual Gemini, maybe these pedels are a little bent
tobytj
Long Term Member
Posts: 1881
Joined: Tue Apr 10, 2007 3:46 pm
Location: Brisbane

Post by tobytj »

kizza mcgrath wrote:What's the answer with the pedels ?? Example: will tf pedels fit a tx ?
A bit late wiht the response but TX - TE pedals are different to TF-TG. It is becase TF-TG have an articulated steering column that penetrates the floor about 40cm (from memory) to the right.

See my late to early model dash conversion thread for detail.
stock_gem
Regular
Posts: 712
Joined: Thu Sep 04, 2008 6:43 pm
Location: Rockhampton

Post by stock_gem »

Whooooo turns out I knew something 2 years ago :lol:
Image
Last edited by stock_gem on Fri Feb 32, 3043 13:75 pm; edited 3.14159265 times in total
Brad86
n00b
Posts: 3
Joined: Wed Dec 04, 2013 9:03 pm

Re: How to Convert an Auto Gemini to a Manual

Post by Brad86 »

Does anyone know how far back to cut the hole from the 2 console holes? I have a tg wagon if that helps?

Sent from my GT-I9305 using Tapatalk
Brad86
n00b
Posts: 3
Joined: Wed Dec 04, 2013 9:03 pm

Re: How to Convert an Auto Gemini to a Manual

Post by Brad86 »

I guess not :-(

Sent from my GT-I9305 using Tapatalk
Azz Azz
n00b
Posts: 2
Joined: Sun Sep 28, 2014 6:40 pm

Re: How to Convert an Auto Gemini to a Manual

Post by Azz Azz »

thanks for the info
Post Reply