Gemini Manual Gearbox Wiring FINALLY EXPLAINED!!

Drivetrain articles (gearbox, torque tube, diff)
TGCOUP
Regular
Posts: 123
Joined: Thu Nov 02, 2006 12:54 am
Location: Melbourne SE

Post by TGCOUP »

oh thank god, this is the solution to my problem ive been having!

Thanks bro
peace out 8) :D
Buggzy
Long Term Member
Posts: 1401
Joined: Wed Oct 05, 2005 5:58 pm
Location: Ballarat

Post by Buggzy »

Jem 12at wrote:Hey i just wired in the reverse lights on my TD wagon, the switch is working on the gearbox, the wiring is properly joined, im getting the right volts, but i still dont have lights. Ive just hooked up to the 2 red wires, is there anything else I should check, anything I couldve missed, except the unlikelyness that both reverse light bulbs have managed to blow? :shock:
where have you checked for "the right volts?" if you have checked at the lights and found voltage then yes either your bulbs are blown or u have a bad earth on them. If you checked voltage accross the switch then in one position there would be power and the other their should be ( because the switch has shorted it out).

I need more info..
Boostin for lyfe!
Post Reply