DIY locked diff

Drivetrain articles (gearbox, torque tube, diff)
zeb05s
n00b
Posts: 5
Joined: Fri May 05, 2006 7:39 pm
Location: nsw

Post by zeb05s »

just fit a mini spool , lots of fun
ROTAHAVIK GEM
Long Term Member
Posts: 1421
Joined: Thu Aug 04, 2005 9:04 pm
Location: looking thru your sisters window!!

Post by ROTAHAVIK GEM »

zeb05s wrote:just fit a mini spool , lots of fun
yer would be al'right if they made them for gems :roll:
Image

Previously Known As gemzilla1
zeb05s
n00b
Posts: 5
Joined: Fri May 05, 2006 7:39 pm
Location: nsw

Post by zeb05s »

i konw that sucks , i know the smalier commo centers fit could you jst fit one of them using the lsd carrier to fit the spool , i fitted one to my brother 5ltr vh and man i had fun driving that did not want to give it back to him :P
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

gemzilla1 wrote:
zeb05s wrote:just fit a mini spool , lots of fun
yer would be al'right if they made them for gems :roll:
cant u use the 28 spline spools???? along with modded commo axels?

whats darren, micheal and ron using? pretty sure all 3 of them run mini spools in there gmeini diffs
"No thank you, Turkish; I'm sweet enough."

Image
ROTAHAVIK GEM
Long Term Member
Posts: 1421
Joined: Thu Aug 04, 2005 9:04 pm
Location: looking thru your sisters window!!

Post by ROTAHAVIK GEM »

Gene FJ20DET wrote:
gemzilla1 wrote:
zeb05s wrote:just fit a mini spool , lots of fun
yer would be al'right if they made them for gems :roll:
cant u use the 28 spline spools???? along with modded commo axels?

whats darren, micheal and ron using? pretty sure all 3 of them run mini spools in there gmeini diffs
yer but that comes down to modifacations,eg shorten axles,re'drillin axles to 4x100,resplining and fittin 28 spline spool,would be better off with a hilux diff
Image

Previously Known As gemzilla1
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

hilux would cost alot more then that.. modded axels u woudl get for about $500 (less if u left them 5 stud), plus the center under $200 from what iv seen un ebay.. lux diff start to finish would cost 3 times that :P
"No thank you, Turkish; I'm sweet enough."

Image
ROTAHAVIK GEM
Long Term Member
Posts: 1421
Joined: Thu Aug 04, 2005 9:04 pm
Location: looking thru your sisters window!!

Post by ROTAHAVIK GEM »

$700 just for all that fuk that,id rather put the money towards a hilux and four link, i can get 1 done for around $2200-$2700 thats not including diff, but get a four link and shocks all included 8)

i think i'll stick to the BOC locker for now though :P
Image

Previously Known As gemzilla1
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

whats the gemini axels?? 25 spline?? under $100 :P

http://cgi.ebay.com.au/Mini-Spool-Borgw ... dZViewItem
"No thank you, Turkish; I'm sweet enough."

Image
ROTAHAVIK GEM
Long Term Member
Posts: 1421
Joined: Thu Aug 04, 2005 9:04 pm
Location: looking thru your sisters window!!

Post by ROTAHAVIK GEM »

gemini axles are 23 spline gene :roll:
Image

Previously Known As gemzilla1
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

hence the question marks... " :roll: "
pretty sure they had 23's on there a few weeks back.. keep an on on there items.. they might put more up (if they have them)
"No thank you, Turkish; I'm sweet enough."

Image
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

i sent them a email asking if they had them or could get them for 23 spline
"No thank you, Turkish; I'm sweet enough."

Image
ROTAHAVIK GEM
Long Term Member
Posts: 1421
Joined: Thu Aug 04, 2005 9:04 pm
Location: looking thru your sisters window!!

Post by ROTAHAVIK GEM »

hmmm even if they do,think about this for a second,how the fuk would ya get it in there,gems only have a small hole for the spool to go thru,and if ya remove the spider gears theres a big recess where the splined spider gears go,think about it i dont think it will work,but i could be wrong :?
Image

Previously Known As gemzilla1
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

dunno.. ask darren or ron?
"No thank you, Turkish; I'm sweet enough."

Image
ROTAHAVIK GEM
Long Term Member
Posts: 1421
Joined: Thu Aug 04, 2005 9:04 pm
Location: looking thru your sisters window!!

Post by ROTAHAVIK GEM »

what model hilux is the one that doe'snt need shortening,want to get my hands on 1 for future mods
Image

Previously Known As gemzilla1
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

"No thank you, Turkish; I'm sweet enough."

Image
Post Reply