OzGemini.com

:: Holden Gemini Forums
It is currently Tue Jun 25, 2019 5:33 am



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Can this 4zd1 crank be repaired???
PostPosted: Fri Mar 23, 2018 9:43 pm 
Offline
Long Term Member

Joined: Sun May 13, 2007 9:34 pm
Posts: 1234
Location: South OZ
Yep do not happy, thrust washer has fallen out and worn the crank, is this repairable???


You do not have the required permissions to view the files attached to this post.

_________________
http://www.ozgemini.com/forums/non-tech ... hp?t=26329


Top
 Profile  
 
 Post subject: Re: Can this 4zd1 crank be repaired???
PostPosted: Tue Apr 03, 2018 8:47 am 
Offline
Moderator

Joined: Wed Sep 28, 2005 11:55 pm
Posts: 2703
Location: Melbourne, Victoria
Hard to say without seeing/measuring. May be as simple as machining it up to the next size thrust washer. Technically you can get it welded and machined but cost goes up pretty quickly doing it that way

_________________
Previously GeminiCoupe/GeminiRollingShell/SCAR3D/Jonnoisac#nt

78 TD Gemini Sedan - R.I.P
81 TE Gemini Sedan
93 200TDI Discovery


Top
 Profile  
 
 Post subject: Re: Can this 4zd1 crank be repaired???
PostPosted: Tue Apr 03, 2018 1:46 pm 
Offline
Long Term Member

Joined: Sun May 13, 2007 9:34 pm
Posts: 1234
Location: South OZ
Cheers,

Got a quote for repair... it's possible but much cheaper to look for another crank., its annoying because the block was in prefect condition.
Looking to see if an E1 crank can be fitted to the D1 block, from my calculations the E1 will only bring up the capacity by 100cc to 2350cc. as the stroke is only 3mm longer.

_________________
http://www.ozgemini.com/forums/non-tech ... hp?t=26329


Top
 Profile  
 
 Post subject: Re: Can this 4zd1 crank be repaired???
PostPosted: Wed Apr 04, 2018 8:11 am 
Offline
Long Term Member

Joined: Mon May 30, 2005 7:47 pm
Posts: 881
Location: 2196
Turbocoupe75 wrote:
Cheers,

Got a quote for repair... it's possible but much cheaper to look for another crank., its annoying because the block was in prefect condition.
Looking to see if an E1 crank can be fitted to the D1 block, from my calculations the E1 will only bring up the capacity by 100cc to 2350cc. as the stroke is only 3mm longer.


Definitely fits ;)

5mm more stroke, and whilst it's only a 125cc increase, the increased stroke helps in other ways.

Mick

_________________
I wish i had something cool and witty in my signature


Top
 Profile  
 
 Post subject: Re: Can this 4zd1 crank be repaired???
PostPosted: Wed Apr 04, 2018 11:13 am 
Offline
Long Term Member

Joined: Sun May 13, 2007 9:34 pm
Posts: 1234
Location: South OZ
:D

thanks for the info, better that buying a crank and finding that it totally different.

Cheers

_________________
http://www.ozgemini.com/forums/non-tech ... hp?t=26329


Top
 Profile  
 
 Post subject: Re: Can this 4zd1 crank be repaired???
PostPosted: Wed Apr 04, 2018 3:19 pm 
Offline
Long Term Member

Joined: Mon May 30, 2005 7:47 pm
Posts: 881
Location: 2196
You need a few other things though to make it work

For my d1 with e1 head and e1 crank, I needed to use the timing gear from the e1 too

_________________
I wish i had something cool and witty in my signature


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron