Post where you are
- steve_sarge
- n00b
- Posts: 12
- Joined: Sat Jul 22, 2006 10:22 pm
- Location: Launnie
Steve (noob)
Devonport
About to take delivery of a TiGga (TG) EVLELF IS SAILING NOW
Ask TXgemmy about it (Evan) as he has looked at it and liked it.
NEW RED MICA PAINT PROFFESIONALLY DONE
13" POLISHED DRAGWAYS, CUSTOM INTERIOR
1.6 LITRE COMES WITH 2.0 LITRE ENGINE SIDE DRAFT WEBBERS 2 1/4" EXAUST WITH NEW EXTRACTORS
BRAND NEW PEDDERS SPORTS RIDER SPRINGS IN THE REAR
Sound Familiar Evan?!?!?!
FORGIVE ME FOR DIVING IN HEAD FIRST WITHOUT INTRODUCTION. I'm a bit of a forum whore due to my vehicle turnover in the last 3-4 years:
Auto XF Fairmont Ghia
5 Speed VH Sedan
5 speed Gold VN Sedan
Auto VN Wagon
5 Speed N13 Exa
5 Speed Chook Rooter (Camry)
Auto El Futura
Auto VY 2 Acclaim (Wifes Shopping trolley)
NEXT IS THE
5 Speed Red TG GEM
I have been in a forum for about every one of these cars (NOT THE CAMRY) and will be happy to be a contributor where I can.
Thanks all[/url]
Devonport
About to take delivery of a TiGga (TG) EVLELF IS SAILING NOW
Ask TXgemmy about it (Evan) as he has looked at it and liked it.
NEW RED MICA PAINT PROFFESIONALLY DONE
13" POLISHED DRAGWAYS, CUSTOM INTERIOR
1.6 LITRE COMES WITH 2.0 LITRE ENGINE SIDE DRAFT WEBBERS 2 1/4" EXAUST WITH NEW EXTRACTORS
BRAND NEW PEDDERS SPORTS RIDER SPRINGS IN THE REAR
Sound Familiar Evan?!?!?!
FORGIVE ME FOR DIVING IN HEAD FIRST WITHOUT INTRODUCTION. I'm a bit of a forum whore due to my vehicle turnover in the last 3-4 years:
Auto XF Fairmont Ghia
5 Speed VH Sedan
5 speed Gold VN Sedan
Auto VN Wagon
5 Speed N13 Exa
5 Speed Chook Rooter (Camry)
Auto El Futura
Auto VY 2 Acclaim (Wifes Shopping trolley)
NEXT IS THE
5 Speed Red TG GEM
I have been in a forum for about every one of these cars (NOT THE CAMRY) and will be happy to be a contributor where I can.
Thanks all[/url]
steve_sarge
- steve_sarge
- n00b
- Posts: 12
- Joined: Sat Jul 22, 2006 10:22 pm
- Location: Launnie
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... %3AIT&rd=1TXgemmy wrote:hey steve im sorry man but i dunno what ur talkin about i dont remember seeing that car but it sounds good tho
Sorry for being vague. It was in the For sale section a little while ago (Ebay) and you posted that so I jumped on the wagon and thought I'd seek your opinion. (Sorry again)TXgemmy wrote:dude that is a very very nice car good luck with the sale wish i lived in melb
I traded my 97 falcon for it this morning. EVLELF came over from Melbourne to do the trade.
It's not quite perrfect, but a nice canvas to "finish" off. I'm trying to figure out if a Gem member owned this ride, if so, nice work and thanks for putting in the hard yards. A 2L would be a nice touch as the 1600 is a bit oily atm. I don't know whether or not to slap myself in the forehead for trading the 97 Futura for this but I like it and not too much $$$$ to spend to complete it.
steve_sarge
Hey guy's
Name: Jon
location: live in bellerive, but i work at Moonah Auto Salvage,
Current Project: Red TG 2.6 turbo,diesel 5 spd big brake's,
big diff,haltech computer, eXtreme clutch,Koni adjustable shock's
quadrant spring's,New 2 Pak paint,New intirior,race seat's
full black retrim,16X7 SV5000 rim's(painted black)should
be finished by around june 07, but don't hold me to that
it's been 3 year's so far!!!!
Long Term Project:need to find a coupe shell of any condtion
for PF60, yet again a 2.6 turbo, this one's had the work's
forged piston's, linished rod's, ported head, datrally valve
spring's,turbo grind cam,adjustable cam gear(custum made)
600cc injector's,AP 7.5 inch clutch,2.6 gearbox,full 4 link rear
with VN housing shortened,big spring L.S.D, 28 spline axle's
watts linkage,coil over's,(out of my old car),r33 vspec brake's
all round,adjustable pedal box(old car again),and with any luck
myself with help from old mate Chris Tanner, we'll get the
cage out off the old TD 4 door a be able to trim it down the
20mm we need to make it fit the coupe shell, that's if you lot
can find me one!!!!!
well that's me, if i can help any of you with anything, be it car
part's or advise just P.M and i'l do anything i can
Cheer's Dude's and Dudette's
Name: Jon
location: live in bellerive, but i work at Moonah Auto Salvage,
Current Project: Red TG 2.6 turbo,diesel 5 spd big brake's,
big diff,haltech computer, eXtreme clutch,Koni adjustable shock's
quadrant spring's,New 2 Pak paint,New intirior,race seat's
full black retrim,16X7 SV5000 rim's(painted black)should
be finished by around june 07, but don't hold me to that
it's been 3 year's so far!!!!
Long Term Project:need to find a coupe shell of any condtion
for PF60, yet again a 2.6 turbo, this one's had the work's
forged piston's, linished rod's, ported head, datrally valve
spring's,turbo grind cam,adjustable cam gear(custum made)
600cc injector's,AP 7.5 inch clutch,2.6 gearbox,full 4 link rear
with VN housing shortened,big spring L.S.D, 28 spline axle's
watts linkage,coil over's,(out of my old car),r33 vspec brake's
all round,adjustable pedal box(old car again),and with any luck
myself with help from old mate Chris Tanner, we'll get the
cage out off the old TD 4 door a be able to trim it down the
20mm we need to make it fit the coupe shell, that's if you lot
can find me one!!!!!
well that's me, if i can help any of you with anything, be it car
part's or advise just P.M and i'l do anything i can
Cheer's Dude's and Dudette's
-
- New Member
- Posts: 42
- Joined: Wed Oct 25, 2006 8:00 pm
- Location: tassie
- steve_sarge
- n00b
- Posts: 12
- Joined: Sat Jul 22, 2006 10:22 pm
- Location: Launnie
-
- New Member
- Posts: 27
- Joined: Mon May 24, 2010 10:33 pm
- Location: Launceston, Tasmania
Re: Post where you are
Shawn , live in somerset, building my custom gemi wagon into a panelvan
-
- Posts: 0
- Joined: Thu Jun 12, 2014 2:36 pm
Re: Post where you are
Shai, Hobart, stock td sedan slowly working at it
Re: Post where you are
Adam, hobart currently have a Tg sedan auto 161*** original kms slowly doing up.