F.S Rotary into gemini conversion kits. 12A and 13B $600
F.S Rotary into gemini conversion kits. 12A and 13B $600
.
Item: Gemini conversion kits to suit 12A, 13B, Turbo and NON turbo rotary engines.
These Kits will include:
Engine Mount (plate which bolts onto the front of the actual engine)
Crossmember (which will pass an inspection in every state in Australia)
Rubber mounts (rubber or solid mounts) rubber mounts are usually Kelpro brand
Custom made clutch cable mechanism, (allows you to keep the original gemini clutch cable) which saves you alot of modifying and headaches trying to convert it over to hydrolic type. (These mechanisms are included in the kits but can be purchased seperatly for $90 posted).
Custom made sump to suit (cant use the original one without getting vibrations/bad angle)
2 X 10mm steel plates
4 x High Tensile bolts
4 x Ring washers
All kits are painted in 2pac High Gloss Black as standard. The kits can be painted in any colour of your choice at a small cost, only charged for the materials. There is no extra charge for having them painted a different colour
Location: Brisbane, Queensland
Website: here and www.ozgemini.com
Item Condition: BRAND NEW
Price and Payment Conditions: These kits are $600 plus postage
Extra Info: Lsited below.
Pictures: See below
Contact Details: Contact Steve on
0421646875 or email slimers@bigpond.com or paintedbyslimer@hotmail.com
Fitting and modplating are available, i have done numerous conversions both 12a and 13B, turbo and non turbo. Drive in drive out deals are also an option. Just let me know what you want and i will tell what you will be looking at cost wise.
Optional Extras:
Custom High pressure/temp oil lines to fit front mount oil cooler... $200
Custom Alloy Radiator.....$250
Wiring loom to suit all model geminis.....$100
Extractors to suit.....$350
Turbo manifold....from $350
[img]http://img177.imageshack.us/img177/1464/photo0725.jpg[/img
Item: Gemini conversion kits to suit 12A, 13B, Turbo and NON turbo rotary engines.
These Kits will include:
Engine Mount (plate which bolts onto the front of the actual engine)
Crossmember (which will pass an inspection in every state in Australia)
Rubber mounts (rubber or solid mounts) rubber mounts are usually Kelpro brand
Custom made clutch cable mechanism, (allows you to keep the original gemini clutch cable) which saves you alot of modifying and headaches trying to convert it over to hydrolic type. (These mechanisms are included in the kits but can be purchased seperatly for $90 posted).
Custom made sump to suit (cant use the original one without getting vibrations/bad angle)
2 X 10mm steel plates
4 x High Tensile bolts
4 x Ring washers
All kits are painted in 2pac High Gloss Black as standard. The kits can be painted in any colour of your choice at a small cost, only charged for the materials. There is no extra charge for having them painted a different colour
Location: Brisbane, Queensland
Website: here and www.ozgemini.com
Item Condition: BRAND NEW
Price and Payment Conditions: These kits are $600 plus postage
Extra Info: Lsited below.
Pictures: See below
Contact Details: Contact Steve on
0421646875 or email slimers@bigpond.com or paintedbyslimer@hotmail.com
Fitting and modplating are available, i have done numerous conversions both 12a and 13B, turbo and non turbo. Drive in drive out deals are also an option. Just let me know what you want and i will tell what you will be looking at cost wise.
Optional Extras:
Custom High pressure/temp oil lines to fit front mount oil cooler... $200
Custom Alloy Radiator.....$250
Wiring loom to suit all model geminis.....$100
Extractors to suit.....$350
Turbo manifold....from $350
[img]http://img177.imageshack.us/img177/1464/photo0725.jpg[/img
Last edited by SLIMER on Tue Sep 18, 2012 1:43 am, edited 20 times in total.
-
- Regular
- Posts: 359
- Joined: Thu May 24, 2007 8:33 pm
- Location: putting my pets on facebook because i cbf paying them attention unless its online...
-
- Regular
- Posts: 747
- Joined: Sat May 28, 2005 5:31 pm
- Location: Melbourne
Last edited by SLIMER on Tue Sep 18, 2012 1:37 am, edited 1 time in total.
-
- New Member
- Posts: 26
- Joined: Fri Aug 26, 2005 7:32 pm
- Location: north side brisbane
Here is one of the old BOLT IN KITS....only selling these for HIGH Horse Power Gemin's.
Last edited by SLIMER on Tue Sep 18, 2012 1:39 am, edited 1 time in total.
-
- Regular
- Posts: 101
- Joined: Fri Sep 01, 2006 8:57 pm
- Location: Blackburn