EOI Door seals, boot seals, Bailey Channel.

INEEDSPETTY · Post by **INEEDSPETTY** » Tue Sep 15, 2009 2:40 pm

Just thought I'd see if anybody would be interested in these items.

One of my close friends parents own a rubber/plastic/pinchwelding factory and I sourced a full set of brand new door seals for around $110. Can also get baily channel really cheap. The more I buy in one lot the cheaper it would be. anyone interested PM me.

Thinking of making an order of 1000m door seals and 500m of baily channel which would be enough for about 100 cars I think.

Exact prices, postage and payment details will be worked out if I get enough intrest.

It just seems that it will be alot cheaper than going through rare spares and heaps better value than buying semi-ratty wreckers items.

Cheers, Wilko.

3xZ · Post by **3xZ** » Tue Sep 15, 2009 8:50 pm

Me be intersted please Wilko

But the the boot seals need to be the small type not the biger type that Clark Ruber sells. As the boots wont sit down proper.

Muzz/za

stubbsy212 · Post by **stubbsy212** » Tue Sep 15, 2009 8:57 pm

Would the baily channel rubbers be joined into a one piece item or would it have a break?

Cheers Nick

TRISTAN86 · Post by **TRISTAN86** » Wed Sep 16, 2009 2:28 pm

Im in the market for a full seal and baily channel kit for my sedan!
Once you've figured out how much it will be and how much to supply for body type , post it up and i'll get in touch

geminiv6turboute · Post by **geminiv6turboute** » Wed Sep 16, 2009 2:42 pm

interested in pano ones.

Andrew64 · Post by **Andrew64** » Wed Sep 16, 2009 5:11 pm

Put me down for a set

Bellys 77 · Post by **Bellys 77** » Wed Sep 16, 2009 6:39 pm

also put me down for a set of bailey channel as long a there joint...
sedan ones

Nick · Post by **Nick** » Wed Sep 16, 2009 8:42 pm

Intersted, Sedan and Coupe

forcexx · Post by **forcexx** » Wed Sep 16, 2009 10:40 pm

very interested. altho what is the bailey channel?

INEEDSPETTY · Post by **INEEDSPETTY** » Thu Sep 17, 2009 10:52 am

All items will be exactly same types as originals and I will have to get all the measurements for sed/wag/coupe. As for baily channels (window "seals" forcexx) and ill have to talk to my mate but i'm sure it will be possible to have them pinch welded at the factory to custom length at a very minimal charge. All door and boot seals will be cut to approximate total length for the model gem requested and everything will probably be charged as "per meter" so if you only want one door seal you just pay for one plus post.

Still looking for a few more interested people..

Nimbus · Post by **Nimbus** » Thu Sep 17, 2009 10:56 am

Set of rubbers for $110? I'm in.

monique · Post by **monique** » Tue Sep 22, 2009 1:10 pm

im keen to get a set for the wagon.

INEEDSPETTY · Post by **INEEDSPETTY** » Fri Sep 25, 2009 11:15 am

I'll be discussing prices and quantitys with my friend in the coming week and i'll post up prices and take individual orders as soon as all the details are worked out.

If possible could some of you do the measurements of door seals, boot seals, bailey channels for wagon/coupe/sedan and confirm the measurement differences(if any) between tx/c/d/e/f/g??

Cheers, Wilko.

forcexx · Post by **forcexx** » Fri Sep 25, 2009 5:48 pm

i would hope you make them slightly bigger then measurements that are given, as it would be very dissapointing to receive a seal that does not fit, and also to leave a bit of slack for if/when they shrink like the originals!

Nick · Post by **Nick** » Sun Oct 11, 2009 2:07 pm

Still going ahead with this?