Crazytims 1980 Chevette Estate

This Forum is here for any members who have any other Isuzus or Opels from around the world (or Australia) that they wish to post up pictures of. EG; bellets, I marks, luvs, rodeos, piazzas, chevettes, kaddets etc… Keep it to one thread per car.. if you get more pics etc, add them to your existing thread, DO NOT start a new one
daddy's ride
n00b
Posts: 5
Joined: Mon Nov 29, 2010 6:31 am
Location: Holland, 20 km's above Amsterdam

Post by daddy's ride »

Great chevette, love the borrowt rims!!!

I will build the same set up in the future, only with a different kind of 16v, i will use the c20xe.
I know, my english isn't that good, but how is your dutch :-)
Image
Crazytim
New Member
Posts: 26
Joined: Sat Oct 07, 2006 12:00 pm
Location: auckland new zealand

Post by Crazytim »

MGOTD wrote:do you have a dyno figure for the engine setup?


Old owner mite will be getting it dyno tuned soon though lots of bills right now booooooo
Crazytims Chevini (Chevette Hatch with TX Gemini front panels) currently in the build... watch this space!!
http://www.ozgemini.com/forums/non-tech ... 9&start=30
Crazytim
New Member
Posts: 26
Joined: Sat Oct 07, 2006 12:00 pm
Location: auckland new zealand

Post by Crazytim »

Image
Image

Pulled her out for some pics today... will get some with the red wagon if weather holds up on weekend.
Wana put my TE bumpers on the red wagon and shuffle round the rims for photos of all 3 together- Crazytim with 3x turn key wagons... amazing!
Crazytims Chevini (Chevette Hatch with TX Gemini front panels) currently in the build... watch this space!!
http://www.ozgemini.com/forums/non-tech ... 9&start=30
Crazytim
New Member
Posts: 26
Joined: Sat Oct 07, 2006 12:00 pm
Location: auckland new zealand

Post by Crazytim »

Image
Image
Image
Crazytims Chevini (Chevette Hatch with TX Gemini front panels) currently in the build... watch this space!!
http://www.ozgemini.com/forums/non-tech ... 9&start=30
Crazytim
New Member
Posts: 26
Joined: Sat Oct 07, 2006 12:00 pm
Location: auckland new zealand

Post by Crazytim »

took vectra in tank pump to my fabricator to weld the centre into the gemini tank outlet.
will get gem tank in then look at getting it dyno tuned and running right.

mean time small list of shite to do.

bolt in back seat
bolt in rear seat belts
drive shaft loop
front seats
seal up heater box on firewall
mount washer bottle and spray jets
Crazytims Chevini (Chevette Hatch with TX Gemini front panels) currently in the build... watch this space!!
http://www.ozgemini.com/forums/non-tech ... 9&start=30
User avatar
Jonno
Korean Jesus
Posts: 2370
Joined: Tue Jul 25, 2006 5:28 pm
Location: Canberra. Where the Fast Geminis live
Contact:

Post by Jonno »

Image

You clearly have too many Geminis.

I'll tell u what you I'll have it imported and I'll look after it no problems ;)
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
Image
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
Crazytim
New Member
Posts: 26
Joined: Sat Oct 07, 2006 12:00 pm
Location: auckland new zealand

Post by Crazytim »

Jonno wrote:Image

You clearly have too many Geminis.

I'll tell u what you I'll have it imported and I'll look after it no problems ;)

You could try and pry the keys from my cold dead fingers...
Crazytims Chevini (Chevette Hatch with TX Gemini front panels) currently in the build... watch this space!!
http://www.ozgemini.com/forums/non-tech ... 9&start=30
Crazytim
New Member
Posts: 26
Joined: Sat Oct 07, 2006 12:00 pm
Location: auckland new zealand

Post by Crazytim »

Image
Image
@ the wheels. Next step fix car trailer so I can go play on a track... errrr get legal sorry.
Crazytims Chevini (Chevette Hatch with TX Gemini front panels) currently in the build... watch this space!!
http://www.ozgemini.com/forums/non-tech ... 9&start=30
Post Reply