LOK15's entry TF "Moonshine Madness"
- LOK15
- Gemini Master
- Posts: 5452
- Joined: Thu May 19, 2005 3:30 pm
- Location: lok.lives@bundamba. ipswich.qld.au.earth
LOK15's entry TF "Moonshine Madness"
I will be using a TF sedan picked up from Moby vic's
And the engine bay as i got it......
Yes , that is oil covering everything.
Car is factory 4 speed 1600cc's of 25 second goodness ( it runs on 3 cylinders )
It does have tuned length extractors and a 2'5" exhaust already fitted.
Originally had a locked diff , but i replaced that back to factory open centre diff
Plans are to rebuild this motor into the 15 second "moonshine run" vehicle it was always destined to become!!
Costs:
Car $175
And the engine bay as i got it......
Yes , that is oil covering everything.
Car is factory 4 speed 1600cc's of 25 second goodness ( it runs on 3 cylinders )
It does have tuned length extractors and a 2'5" exhaust already fitted.
Originally had a locked diff , but i replaced that back to factory open centre diff
Plans are to rebuild this motor into the 15 second "moonshine run" vehicle it was always destined to become!!
Costs:
Car $175
Getting too old for this s*#t!!
- LOK15
- Gemini Master
- Posts: 5452
- Joined: Thu May 19, 2005 3:30 pm
- Location: lok.lives@bundamba. ipswich.qld.au.earth
OK , so here is the plan.
G161 to be bored and 2lt pistons put into it
G161 TX head will be used , home port job.
Intake i'll leave a secret for now.
Dizzy will be played with a little , basically changing the timing total.
Camshaft will be roughly a 30/70
Will be running exhaust currently incar , which is 4-1 snakes ( you can see them kinda in the pic )
4 speed box and stock open centre diff.
Planning on pulling motor out in the next fw weeks and stripping it down in the shed.
G161 to be bored and 2lt pistons put into it
G161 TX head will be used , home port job.
Intake i'll leave a secret for now.
Dizzy will be played with a little , basically changing the timing total.
Camshaft will be roughly a 30/70
Will be running exhaust currently incar , which is 4-1 snakes ( you can see them kinda in the pic )
4 speed box and stock open centre diff.
Planning on pulling motor out in the next fw weeks and stripping it down in the shed.
Getting too old for this s*#t!!
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
- LOK15
- Gemini Master
- Posts: 5452
- Joined: Thu May 19, 2005 3:30 pm
- Location: lok.lives@bundamba. ipswich.qld.au.earth
I have various cams here , even have a 40/80 , but dont really want to use it.redzone (coxy) wrote:Get a regrind lok, surely you could do that within budget
There might be a 35/75 amongst them all , but will have to get some spare time to see about finding lift and duration.
Getting too old for this s*#t!!
- redzone (coxy)
- Long Term Member
- Posts: 1659
- Joined: Sat Jun 10, 2006 3:22 am
- Location: sunshine coast
-
- New Member
- Posts: 27
- Joined: Sun Feb 11, 2007 12:26 pm
- Location: Darwin, NT