4A10SHN - Rebuild #2
- Holden202T
- Regular
- Posts: 492
- Joined: Sun Mar 16, 2008 7:47 pm
- Location: Tenambit, NSW.
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
motor looking very nice
i do not envy you having to tape up all the cage, that looks like a pita!
i do not envy you having to tape up all the cage, that looks like a pita!
No matter what the question is, the answer is always more horsepower!!
Re: Rodeo Rebuild for [4A10SHN]
Mate that was fun compared to sanding and bogging and seam sealing both sides of the floor pan
Re: Rodeo Rebuild for [4A10SHN]
I got the rest of the injectors today so all up that is 10 @ 1870cc each, I'm hoping that will be enough without going to a mechanical setup with a separate fuel reg or high speed scroll valve.I also finished up on the pistons until I get the head back from the machine shop. It's gone off to have some "dummy" springs put in to check the valve to piston clearance
It's all moving along. Should be some solid progress once the car is back from the paint shop
Josh
- Holden202T
- Regular
- Posts: 492
- Joined: Sun Mar 16, 2008 7:47 pm
- Location: Tenambit, NSW.
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
holy crap 10 injectors ?? i can see you have two injector fittings on each runner, so figured 8, but i assume theres a few others going to be hidden somewhere else ?
thats an absolute crap load of methanol
thats an absolute crap load of methanol
No matter what the question is, the answer is always more horsepower!!
Re: Rodeo Rebuild for [4A10SHN]
Another one on the front of the turbo and another one on the cross over pipe (no intercooler)
- Holden202T
- Regular
- Posts: 492
- Joined: Sun Mar 16, 2008 7:47 pm
- Location: Tenambit, NSW.
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
well thats about 1000hp of fuel supply so im very interested to see the end results!
No matter what the question is, the answer is always more horsepower!!
Re: Rodeo Rebuild for [4A10SHN]
It's got a 2500hp magnafuel pump as well. Let's hope it doesn't end up in a fireball!
- Holden202T
- Regular
- Posts: 492
- Joined: Sun Mar 16, 2008 7:47 pm
- Location: Tenambit, NSW.
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
yeah i don't think anyone wants to think about that outcome for their cars!
No matter what the question is, the answer is always more horsepower!!
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
Very keen to see the outcome Josh
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
Re: Rodeo Rebuild for [4A10SHN]
It's gone for now!
Tested the valve to piston are they are way too close and even touching on some durations of the camshaft so they are back in the milling room and ready to be fly cut
Big step getting that shell off to the paint shop. HUGEEEE hours in prep on both sides of the floor and seam sealing to the point where I had to cover the car up so I didnt keep sanding and filling. I should get the car back in a week or so and the engine should be close to being ready to put in
- Holden202T
- Regular
- Posts: 492
- Joined: Sun Mar 16, 2008 7:47 pm
- Location: Tenambit, NSW.
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
f*#k yeah, all pictures are looking good
No matter what the question is, the answer is always more horsepower!!
- firebug
- Regular
- Posts: 456
- Joined: Mon Oct 05, 2009 8:28 am
- Location: Newcastle -32.872095,151.707064
Re: Rodeo Rebuild for [4A10SHN]
This thread is better than Redtube!
Just sayin...
Just sayin...
"Can't stop addicted to the shindig!..."
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
x2!
Seeing all this cool 4z s*#t makes me think I shoulda just sent mine to Perth for some Josh love time...
What sorta figures you shooting for?
Seeing all this cool 4z s*#t makes me think I shoulda just sent mine to Perth for some Josh love time...
What sorta figures you shooting for?
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
Re: Rodeo Rebuild for [4A10SHN]
Thanks for all the positive words guys! Shooting high but don't won't to throw around any numbers until I see how happy is it Jonno
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Re: Rodeo Rebuild for [4A10SHN]
Yeah cool man
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw