Ye Royal Shed
- LOK15
- Gemini Master
- Posts: 5452
- Joined: Thu May 19, 2005 3:30 pm
- Location: lok.lives@bundamba. ipswich.qld.au.earth
Ye Royal Shed
So , here it is. Before i setup completely , im insulating it , and sheeting it , making it almost like a loungeroom for cars. Should be an extremely cool room to be working in during summer Also looking into the thin stuff they glue to rolladoors to insulate them as well....
Getting too old for this s*#t!!
- LOK15
- Gemini Master
- Posts: 5452
- Joined: Thu May 19, 2005 3:30 pm
- Location: lok.lives@bundamba. ipswich.qld.au.earth
off to bunnings today to get a sheet or 3 of gyprock... all pink batts are in , minus right near the roller door,as i'll be boxing the doors in and fitting some stuff to help seal when they are open/closed.
Also will be building a box to house some filters and fans for when im painting , making it as close to a booth as possible , this will be down the track a little bit , as in in no rush to do it , but i'l keep the thread updated
Also will be building a box to house some filters and fans for when im painting , making it as close to a booth as possible , this will be down the track a little bit , as in in no rush to do it , but i'l keep the thread updated
Getting too old for this s*#t!!
- LOK15
- Gemini Master
- Posts: 5452
- Joined: Thu May 19, 2005 3:30 pm
- Location: lok.lives@bundamba. ipswich.qld.au.earth
1 wall done..
Must say , its VERY cool in there now middle of day , you can still feel the doors radiating heat when closed , so now i gots to find the thin silver stuff to glue to the doors, and then that'll be it... i guess.
this is the first time ever , i have done any gyprocking... even had to call a plasterer i know to find out how to cut it safely!
Next wil be 2 roof panels to see if the beams will hold without too much sag.
Must say , its VERY cool in there now middle of day , you can still feel the doors radiating heat when closed , so now i gots to find the thin silver stuff to glue to the doors, and then that'll be it... i guess.
this is the first time ever , i have done any gyprocking... even had to call a plasterer i know to find out how to cut it safely!
Next wil be 2 roof panels to see if the beams will hold without too much sag.
Getting too old for this s*#t!!
haha in NZ we insulate for the cold... (by that I mean put on another layer)
Crazytims Chevini (Chevette Hatch with TX Gemini front panels) currently in the build... watch this space!!
http://www.ozgemini.com/forums/non-tech ... 9&start=30
http://www.ozgemini.com/forums/non-tech ... 9&start=30
go the J's!!!!!!!!!!!!LOK15 wrote:107.7 i hate to say it but its s*#t.. used to be good ( i listened to it occationally ), but lately its gone to crap.. plus im old , so i swap betwen 97.3 , nova , and 94.something river fm.
Would like to get rebel fm , but cannot pick it up
you old man.....i mean your really old....like 6months or so on me!
lookin good, you need a good spot to get away from the other half i have found....
cheers