Search found 23 matches

by sammy
Thu May 19, 2011 10:22 am
Forum: Gemini Chat
Topic: Will an ebay aluminium radiator keep a V6 cool
Replies: 5
Views: 1615

Sorry, maybe I should have given more info. This is not for a gemini but an FJ Holden, however the front has been modified and is wider than standard and turns out the gemini radiator size is perfect. The engine is standard, wil run thermos, standard tune. I thought it would be good to ask here seei...
by sammy
Wed May 18, 2011 5:04 pm
Forum: Gemini Chat
Topic: Will an ebay aluminium radiator keep a V6 cool
Replies: 5
Views: 1615

anyone?
by sammy
Mon May 16, 2011 10:45 am
Forum: Gemini Chat
Topic: Will an ebay aluminium radiator keep a V6 cool
Replies: 5
Views: 1615

Will an ebay aluminium radiator keep a V6 cool

Hi just wondering wether anyone has used the ebay radiators to cool a V6 ecotec?

Thanks
by sammy
Fri Jan 14, 2011 10:37 am
Forum: Gemini Chat
Topic: Fitting SLE Chrome window trims (Coupe)
Replies: 18
Views: 7263

Thanks for your reply.

Just to confirm to fit a set of these i would need to grind off the studs on the doors used for the standard thin trims?
by sammy
Fri Jan 14, 2011 8:29 am
Forum: Gemini Chat
Topic: Fitting SLE Chrome window trims (Coupe)
Replies: 18
Views: 7263

so do these trims use the same clips that clip on to the studs on the doors as the narrow trims do? Or do they just glue/stick on?

Any info would be great.

Cheers
by sammy
Sun Oct 24, 2010 8:06 pm
Forum: Gemini Chat
Topic: twincam laser cut exhaust flange
Replies: 5
Views: 1859

I have one for sale if anyone needs one pm me.
by sammy
Sun Oct 24, 2010 10:44 am
Forum: Technical Disscusion
Topic: Stock RB dizzy internals
Replies: 94
Views: 105055

Is it okay to use a GT40 coil with the RB internals? Only that I have one spare that could be put to use....
by sammy
Sun Oct 17, 2010 12:30 pm
Forum: Gemini Chat
Topic: Rear brakes will not bleed!
Replies: 7
Views: 3374

The t piece after the flexible hose over the diff was blocked although some air did come out when compressed air was blown through. Just cleared it out/found the blockage with some thin wire
by sammy
Sun Oct 17, 2010 11:22 am
Forum: Gemini Chat
Topic: Rear brakes will not bleed!
Replies: 7
Views: 3374

The master cylinder was replaced with a good condition one that came out a TE. I didn't think this would cause a problem as it is still pushing fluid as far as the diff....
by sammy
Sun Oct 17, 2010 9:43 am
Forum: Gemini Chat
Topic: Rear brakes will not bleed!
Replies: 7
Views: 3374

Sorry i got that wrong.

I have blown compressed air down the hose that goes over the diff and it was blowing air out the lines both sides.

However we can NOT get fluid to come out the lines before they screw in to the wheel cylinders. So the problem is before the wheel cylinders.
by sammy
Sun Oct 17, 2010 7:52 am
Forum: Gemini Chat
Topic: Rear brakes will not bleed!
Replies: 7
Views: 3374

Rear brakes will not bleed!

Hi guys I can not get the rear brakes to bleed on my 79 TD. I replaced the rear wheel cylinders and cleaned out the from calipers. Fronts bleed fine, rears won't. I have replaced the MC and bench bled it. I have taken the lines off and cleaned them. There is fluid Edit* IS NOT *edit getting to the l...
by sammy
Sat Oct 09, 2010 10:36 pm
Forum: Gemini Chat
Topic: Intermittent Wiper Mod on a TD
Replies: 9
Views: 2358

It would be good, the mechanical side is easy for mr anyway, it's the wiring that confuses me.

I think LR getting it's power from LY or LW (can't remember) when they are bridged within the stalk switch. Maybe this is different to the one used in the write up.
by sammy
Sat Oct 09, 2010 9:24 pm
Forum: Gemini Chat
Topic: Intermittent Wiper Mod on a TD
Replies: 9
Views: 2358

Definantly earthing the plug side of the wire
by sammy
Sat Oct 09, 2010 11:09 am
Forum: Gemini Chat
Topic: Intermittent Wiper Mod on a TD
Replies: 9
Views: 2358

Okay I tried following your diagram again, I cut the LR wire between the plug and stalk switch. As a test I thought I would just earth the plug side of the wire to simulate the timer. However the LR wire on the plug side has positive power, so when earthing it just blows the wiper 15A fuse. Any help...
by sammy
Fri Oct 08, 2010 10:39 am
Forum: Gemini Chat
Topic: Intermittent Wiper Mod on a TD
Replies: 9
Views: 2358

So I put the timer before the wiper stalk switch, or between the wiper stalk switch and the motor/cam switch?

Thanks for your help.