Search found 480 matches
- Tue Jun 05, 2018 9:43 pm
- Forum: Gemini Chat
- Topic: Torque tube
- Replies: 2
- Views: 5310
Re: Torque tube
Zachary what he said. Not sure if I put pics up or not on my build
- Thu Apr 05, 2018 7:10 am
- Forum: Gemini Chat
- Topic: Wrecker Part list for EFI
- Replies: 5
- Views: 7838
Re: Wrecker Part list for EFI
I reckon it would be cheaper in the long run to buy an aftermarket ecu.
I picked up my late model sm4 for 800 bucks with a full loom.
By the time you mess around with a Delco you would have spent that anyway.
Then you can use what ever sensors you want as well.
I picked up my late model sm4 for 800 bucks with a full loom.
By the time you mess around with a Delco you would have spent that anyway.
Then you can use what ever sensors you want as well.
- Sun Dec 31, 2017 2:47 pm
- Forum: Gemini Chat
- Topic: OzGemini Top 10 Dyno Results Listing
- Replies: 21
- Views: 23978
Re: OzGemini Top 10 Dyno Results Listing
I will be interested to see how it goes as well
Power variation seems all over the map with g series builds!
Power variation seems all over the map with g series builds!
- Sun Dec 31, 2017 6:54 am
- Forum: Gemini Chat
- Topic: OzGemini Top 10 Dyno Results Listing
- Replies: 21
- Views: 23978
Re: OzGemini Top 10 Dyno Results Listing
In the memory of Peter Brock I'm repping 05
- Sun Dec 10, 2017 4:34 pm
- Forum: Noobs Playground
- Topic: Crank bolt direction
- Replies: 6
- Views: 8674
Re: Crank bolt direction
There ain't too many that are left hand thread boys
- Thu Dec 07, 2017 7:57 pm
- Forum: Gemini Chat
- Topic: Ozgemini Dyno Results Thread
- Replies: 176
- Views: 172755
Re: Ozgemini Dyno Results Thread
I don't have the sheet yet but...
385hp, E85, 18psi gtx3076 g200z
Have to run it for a while then we will shoot for 40psi
385hp, E85, 18psi gtx3076 g200z
Have to run it for a while then we will shoot for 40psi
- Fri Oct 27, 2017 7:39 pm
- Forum: Gemini Chat
- Topic: G200z dipstick length
- Replies: 0
- Views: 5221
G200z dipstick length
Hey guys I need a length for a standard g200z dipstick. If you don't know the g161 dipsticks are a fair bit longer and won't fit in the g200z tube. I used the g200 sump for the extra capacity and now need to shorten a 161 dipstick to suit as they are rare as hens teeth. If anyone has or knows of som...
- Fri Oct 27, 2017 7:32 pm
- Forum: Gemini Chat
- Topic: lower balljoint taper
- Replies: 4
- Views: 6266
Re: lower balljoint taper
That's interesting nick, would be good to fab up custom top and bottom wish bones but that ain't happening any time soon!
- Fri Oct 27, 2017 7:29 pm
- Forum: Gemini Chat
- Topic: rockers and shafts
- Replies: 10
- Views: 10117
Re: rockers and shafts
If you want to run swivel feet you need steel rocker arms and they need to be modified. That's for a g series though. Usually we just feel the wear between the shaft and rocker arm, it's very obvious if they are worn you will see it on the shafts and can measure the amount of wear between where the ...
- Fri Oct 27, 2017 7:14 pm
- Forum: Gemini Chat
- Topic: Crow Cam Issues
- Replies: 17
- Views: 16257
Re: Crow Cam Issues
Good stuff.
I will see how mine goes, I have been using crow cams for 14 years and haven't had one fail yet, but we only ever bought new shafts, regrinds only when they didn't have an option.
I will see how mine goes, I have been using crow cams for 14 years and haven't had one fail yet, but we only ever bought new shafts, regrinds only when they didn't have an option.
- Wed Oct 25, 2017 7:35 am
- Forum: Gemini Chat
- Topic: Crow Cam Issues
- Replies: 17
- Views: 16257
Re: Crow Cam Issues
Yea and what brand oil would be good info to post uo
- Tue Oct 03, 2017 10:43 am
- Forum: Gemini Chat
- Topic: Crow Cam Issues
- Replies: 17
- Views: 16257
Re: Crow Cam Issues
Yea, a lot of guys at the track and on other forums have been sending samples to Blackstone labs.
It's unreal the findings
It's unreal the findings
- Fri Sep 29, 2017 7:22 am
- Forum: Gemini Chat
- Topic: Crow Cam Issues
- Replies: 17
- Views: 16257
Re: Crow Cam Issues
Revitalising an old thread, the machine shop has had quite a few engines come in with massive cam and valve train wear. Running the same brand of oil that a couple of you are speaking of.
I usually use it too, even in my Silverado but im going back to castrol
I usually use it too, even in my Silverado but im going back to castrol
- Tue Aug 29, 2017 7:16 pm
- Forum: Gemini Chat
- Topic: G200z Main studs
- Replies: 8
- Views: 7080
Re: G200z Main studs
No just tapped the holes to the bottom. The threads are about 10mm ish short of the bottom of the hole. So drop the thread down and recessed the thread so the studs screws all the way in. This only works if your running a girdle or you would need shorter studs
- Mon Aug 28, 2017 8:26 pm
- Forum: Gemini Chat
- Topic: G200z Main studs
- Replies: 8
- Views: 7080
Re: G200z Main studs
Sorry I posted it on another thread.
I used the same studs as you use in the head rb26dett studs. I plunged the thread all the way down and recessed the thread down 8mm. Sent you a pic nick, sump needs mods but it all works
I used the same studs as you use in the head rb26dett studs. I plunged the thread all the way down and recessed the thread down 8mm. Sent you a pic nick, sump needs mods but it all works