OzGemini.com

I think I've read the 1.6 heads have more available room for port work so they have the potential to make more power.
I could be wrong, tho. It's been rumored to have happened before.

Cat get into it with the Gumby?

I did mine with a roller for <$100 but it did take alot of time. Came out pretty good. http://www.ozgemini.com/forums/non-tech/viewtopic.php?t=15373 http://img150.imageshack.us/img150/9975/photo002ug8.jpg http://img89.imageshack.us/img89/5120/photo006lp2.jpg http://img153.imageshack.us/img153/5978/s...

Such a warm & fuzzy attitude around here :? Don't get worked up about it too much. The same Q's come up regularly from eager novices & at times you'll catch SOME guys :roll: in full blown grumpy be-yatch mode. Not enuff nookie or something, I dunno. Block # location (this is a G200Z) :wink: ...

Check your grounds, or what y'all call "earths". It seems to be a common cause of all kinds of electric gremlins on the PF's. Besides the battery & engine block grounds I think there is one behind the headlights. That was the other thing I was gonna mention, the steering eheel stalk th...

PM sent

Who's there?

While it is true that atmospheric fluctions in ambient temperature & humidity will effect mechanical scales the question concerned weight distribution . If all for scales being used are under the same conditions you should be able to get a close approximation of the differences among the four co...

Looks alot like this (@ $47 retail). Am I missing something?

http://www.robietherobot.com/storm/prod ... 6420020106

Here's another way that was suggested to me. Credit to Jerry(JLEMOND) on www.IsuzuPup.com. Copied & pasted - he always writes in all caps - as a retired Isuzu trainer no one minds. :wink: YOU NEED ONE 5 AMP DIODE AND AN EXTRA CHARGE RELAY , , THE FUEL PUMP WILL RUN AS LONG AS THE STARTER IS ENGA...

...here 'tis , with and without flare...looks kinda cool...then look at getting the right sized rims made ( i think 8" will be the biggest ) Flares? Just get a 3" lift on that suka! Throw a gunrack in the back window & you can go mud-boggin' with the Redneck-Bubba crowd around these h...

...i dont think the 185 will stretch enough :cry: Get me, I am NOT advocating this technique but I used to work for a guy who was more interested in sales than proper fitting & safety. He'd sell wide rims to young guys & mount their narrow stock tires on 'em. In order to get the bead to sea...

Disconnect the fuel feed hose from the carb, & with it aimed into a can (or something) have someone crank it over to make sure the supply is adequate & constant. You can try a shot of compressed air upstream/backwards to eliminate blockages as a cause. Stock carb? Is there a screen filter in...

effin you tube. Is there something thats not posted up on there. Gene, its good practise that if your touching the master cylinder for any reason you bleed all the brake circuits with new fluid. It doesnt take long to do 4 wheels instead of 2. A handy tip is if you can get a different colour to the...

wait up, doing it like that yank, the second you rmove the rubber hoses to install it your gonna get air back in there.... defeating the purpose :?: If you leave them connected until after it's bolted in & pull 'em off right when you're ready to screw in the brake lines you'll lose some but not...