Search found 976 matches
- Mon Dec 24, 2012 5:57 pm
- Forum: Gemini Chat
- Topic: Ideal Fuel Pump
- Replies: 22
- Views: 7219
Single or twins? If you are running a single dellorto it could be the size of the needle and seat. A standard 40 mm dellorto is only designed to let fuel in the bowl for half and engine cos they normally run in pairs. You can buy a larger needle and seat specifically for single carb set up. If the ...
- Fri Dec 21, 2012 7:21 pm
- Forum: Gemini Chat
- Topic: Ideal Fuel Pump
- Replies: 22
- Views: 7219
Ideal Fuel Pump
So I'm getting fuel cut when drifting. Basically I can get through 1 full corner or a few munji's in at full throttle (3rd gear), using second seems to bring it on quicker (high revs). And then fuel cut hits and I have to back off coz there is literally no fuel to burn. It seems pretty evident to me...
- Fri Dec 21, 2012 10:09 am
- Forum: Noobs Playground
- Topic: Rattly G200Z
- Replies: 17
- Views: 6009
- Wed Dec 19, 2012 10:11 pm
- Forum: Noobs Playground
- Topic: Rattly G200Z
- Replies: 17
- Views: 6009
- Wed Dec 19, 2012 10:39 am
- Forum: Gemini Chat
- Topic: Gemini stainless door sunvisors ???
- Replies: 10
- Views: 2792
- Wed Dec 19, 2012 10:38 am
- Forum: Noobs Playground
- Topic: Rattly G200Z
- Replies: 17
- Views: 6009
Thanks Toby, I ran out and popped the rocker off and checked it and it was all fine. The chain was sitting centred, the tensioner all the way out and when you rotate the engine normal rotation it would stay tensioned, when you tried to rotate it the other way it would try to de-tension but is stoppe...
- Tue Dec 18, 2012 2:28 pm
- Forum: Noobs Playground
- Topic: Rattly G200Z
- Replies: 17
- Views: 6009
Rattly G200Z
This is a quick video of my G200Z, It's a high compression engine 10:1, electronic ignition, 4-2-1 extractors, ported head, sidedraft dellorto 40 carbie. http://youtu.be/Wd6Wf7j8w4E It's a bit hard to tell in the video but it sounds overly rattly compared to other G-series I've had. Anyone got any i...
- Mon Dec 17, 2012 10:25 pm
- Forum: Gemini Chat
- Topic: Kill Switch from starter ????
- Replies: 4
- Views: 1648
- Mon Dec 10, 2012 11:50 am
- Forum: Gemini Chat
- Topic: Radiator cap pressure ratings
- Replies: 1
- Views: 743
Radiator cap pressure ratings
Hey all, was in the shop today after a new radiator cap and the guy proceeded to ask what pressure cap did I want and listed about 5 different pressures from 4 - 20 psi. I can see the sense in not going for lower pressure, it would always boil over, but is there a problem in going with a 20 psi cap?...
- Thu Dec 06, 2012 10:44 pm
- Forum: Gemini Chat
- Topic: getting distributior regraphed
- Replies: 2
- Views: 1490
Just got my electronic one regraphed recently for my ~10:1 compression g200z. After having a stab in the dark regraphing it myself a few times before I figured I'd spend the coin and get it done on the machine. Turns out I wasnt far off by following the guide in the technical section. You will pay r...
- Thu Dec 06, 2012 10:39 pm
- Forum: Noobs Playground
- Topic: Tx radiator upgrade
- Replies: 9
- Views: 5151
Going through this process atm with a TD. In the early models you need to watch your height of the radiator as the lower radiator support is right under the radiator unlike the late model which has it further forward. Celica RA40 and Diesel radiator will not fit an early model without re-coring to a...
- Thu Dec 06, 2012 10:34 pm
- Forum: Gemini Chat
- Topic: Opinion on Tyres for 13 x 7
- Replies: 17
- Views: 5214
- Sat Dec 01, 2012 11:02 pm
- Forum: Gemini Chat
- Topic: Clutch kIT RATING/PERFORMANCE
- Replies: 6
- Views: 1604
- Wed Nov 21, 2012 6:41 pm
- Forum: Gemini Chat
- Topic: Intermitent wipers
- Replies: 11
- Views: 3085
- Fri Nov 09, 2012 7:17 pm
- Forum: Noobs Playground
- Topic: Towing with a Gem..
- Replies: 14
- Views: 4566