Ozgemini Dyno Results Thread
Re: Ozgemini Dyno Results Thread
Its not the journal itself. Its the clearances of crank journal / bearing / block journal. G161 tolerances were never designed for boost so they might be too tight was my point
I wish i had something cool and witty in my signature
Re: Ozgemini Dyno Results Thread
And most people who rebuild them dont actually clearance them properly either. G series engines are probably one of the worst to set up when you grind them undersize. Can move it to another thread, its just good to see something happening in the ghost town that is ozgemini
Coupe rebuild number 6..
viewtopic.php?t=44564
viewtopic.php?t=44564
Re: Ozgemini Dyno Results Thread
Jonno can move it if he wants haha!
Yes they were never designed for these cylinder pressures i agree with you, but either way they can take an absolute beating from the factory!
Yes they were never designed for these cylinder pressures i agree with you, but either way they can take an absolute beating from the factory!
TC g161z turbo daily
Adaptronic e420d, proboost gt2871
TG g161z drift car.
- G161z 1643cc, twin 40 dcoe webers.
14.994 @ 89.96/91.41mph
115.2whp @ only 6200rpm
Adaptronic e420d, proboost gt2871
TG g161z drift car.
- G161z 1643cc, twin 40 dcoe webers.
14.994 @ 89.96/91.41mph
115.2whp @ only 6200rpm
Re: Ozgemini Dyno Results Thread
4zc1t
unknown internals but have told worked with forgies and other fun things to male you go fast, biggest restriction is the turbo
e85, custom plenum, aftermarket intercooler, 1000cc injectors.
148.8kw
unknown internals but have told worked with forgies and other fun things to male you go fast, biggest restriction is the turbo
e85, custom plenum, aftermarket intercooler, 1000cc injectors.
148.8kw
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Re: Ozgemini Dyno Results Thread
150kw~ is usable power man!
Smooth curve to.
Maybe I should add my dyno log to this. It's not very impressive lol
Smooth curve to.
Maybe I should add my dyno log to this. It's not very impressive lol
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Re: Ozgemini Dyno Results Thread
Looking I should make a top 10 dyno thread like the quarter mile one...
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
Re: Ozgemini Dyno Results Thread
thanks jonno! posted it on facebook and though i might aswell added here incase anyone wants it!
you should! do g series na and turbo and do 4z na and turbo and then all others
you should! do g series na and turbo and do 4z na and turbo and then all others
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Re: Ozgemini Dyno Results Thread
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
Re: Ozgemini Dyno Results Thread
MADDDD!!!! wont stay number 3 very long id image!!
- Jonno
- Korean Jesus
- Posts: 2370
- Joined: Tue Jul 25, 2006 5:28 pm
- Location: Canberra. Where the Fast Geminis live
- Contact:
Re: Ozgemini Dyno Results Thread
My mates got my old Piazza still. I told to do a few things.sandy wrote:MADDDD!!!! wont stay number 3 very long id image!!
Might come close
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
GemiNats > https://www.facebook.com/GeminiNationals
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
Re: Ozgemini Dyno Results Thread
I thought i shared this already .
Click here for boost noises https://www.youtube.com/watch?v=ptDnf1upnek
Click here for boost noises https://www.youtube.com/watch?v=ptDnf1upnek
Re: Ozgemini Dyno Results Thread
I don't have the sheet yet but...
385hp, E85, 18psi gtx3076 g200z
Have to run it for a while then we will shoot for 40psi
385hp, E85, 18psi gtx3076 g200z
Have to run it for a while then we will shoot for 40psi
Coupe rebuild number 6..
viewtopic.php?t=44564
viewtopic.php?t=44564