AN fittings and hard fuel lines

[Jonno]

Been ill most of the weekend so zero got done.

However I've had a play with the 5/16 line and my fittings. This will work.

Now I'll have a look at the tool Moley mentions above but I was thinking of running the line straight from the tank to the inlet.
So not worry about following the factory lines? Any reason this would be a problem.
I need to negotiate the fuel lines at the trans tunnel as they currently come close to the shifter anyway
Thoughts?

[moley]

You still need a roll seam or your hoses will blow off old boy

[moley]

Unless you are using some sort of fancy braided made up already fandangled things

[Jonno]

Yeah so same as firebugs arrangement.

hard line > fitting adapter > fitting > braided Teflon hose > fitting > fuel rail