I have no supply going to the 3 position fan control when the engine is running.
All fuses are good.... Seems like the supply wire at the sw goes towards the left, not to the rt toward the fuse. Thinking there may be a relay somewhere? I don't want to cut all the tape of the looms to trace the cables...... any IDEAS.....Cheers.
WIRING DIAGRAM FOR TG INTERIER FAN CIRCUIT...CHEERS
-
- New Member
- Posts: 24
- Joined: Sun Nov 27, 2016 6:09 pm
- Location: LYRUP (The Riverland)