S15 SR20det wiring into TE

Forum for all the new members to ask all them questions we have heard before.
Flaming will not be tolerated... If the regulars don’t want to read noobie stuff then don’t open this forum.
Post Reply
Drew
n00b
Posts: 4
Joined: Sat Jun 04, 2016 6:42 am

S15 SR20det wiring into TE

Post by Drew »

Is there anyone out there that could give me a guide to wiring a s15 sr20 into a TE wagon. I roughly understand how to wire up a s13 but believe the s15 to be different. Any help would be much appreciated. Cheers
User avatar
Jonno
Korean Jesus
Posts: 2370
Joined: Tue Jul 25, 2006 5:28 pm
Location: Canberra. Where the Fast Geminis live
Contact:

Re: S15 SR20det wiring into TE

Post by Jonno »

Should realistically be the same.

Wire in the sensors as normal.

Setup all your power earths and ignition wires, fuel pumps and go.

There's no difference in how to wire any engine conversion in really.

Probably best to separate most of the non-essential stuff from an S15 and wire in the rest
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
Image
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
User avatar
Jonno
Korean Jesus
Posts: 2370
Joined: Tue Jul 25, 2006 5:28 pm
Location: Canberra. Where the Fast Geminis live
Contact:

Re: S15 SR20det wiring into TE

Post by Jonno »

Alternatively after market ecu
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
Image
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
User avatar
moley
Long Term Member
Posts: 803
Joined: Fri Apr 02, 2010 11:40 pm
Location: Banjo Country

Re: S15 SR20det wiring into TE

Post by moley »

Jonno wrote: Probably best to separate most of the non-essential stuff from an S15 and wire in the rest
Tis correct for just about all. Its only retarded ecus that are tied to bems that are difficult really. Just pin all the wires and tape them with masking tape and write on it. Do one at a time and mark it off your diagram makes it hard to go wrong
Coupe rebuild number 6..
viewtopic.php?t=44564
Drew
n00b
Posts: 4
Joined: Sat Jun 04, 2016 6:42 am

Re: S15 SR20det wiring into TE

Post by Drew »

Cheers for the reply guys. Looks like I'll pull the loom apart and give it a crack.
User avatar
Jonno
Korean Jesus
Posts: 2370
Joined: Tue Jul 25, 2006 5:28 pm
Location: Canberra. Where the Fast Geminis live
Contact:

Re: S15 SR20det wiring into TE

Post by Jonno »

Cool!

Build thread also
75 TX Coupe
GemiNats > https://www.facebook.com/GeminiNationals
Image
#TurboFamily #Geminats #Bucketship
YT: https://www.youtube.com/channel/UCPKSHb ... akJ04sOYjw
Post Reply