Aftermarket torque tube rubbers

Drivetrain articles (gearbox, torque tube, diff)
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Aftermarket torque tube rubbers

Post by Gene FJ20DEBT »

Thirsty wrote: There is a company called Qld Rollers and Liners at Rocklea that remake the rubbers. Take the torque tube and the mount off the car to them and they will do it in a few days for about $140.00.
I have one in Rally Gem and it is just fine. Took me 18 months of rallying to wear the first one out. The newest one is bigger and looks stronger.
Cheers Thirsty :)
"No thank you, Turkish; I'm sweet enough."

Image
JaZZZa
Regular
Posts: 725
Joined: Thu May 26, 2005 1:53 pm
Location: Warnbro, Perth, WA
Contact:

Post by JaZZZa »

for those not in qld, coventries also do an afermarket version.

i paid $130 for mine not so long ago and had it pressed on for $20

has been fine ever since! 8)
Image
F|sh
Long Term Member
Posts: 2088
Joined: Mon May 16, 2005 11:13 pm
Location: Eaton

Post by F|sh »

sure it was aftermarket??

the carrier bearing is no longer available too.
Image
prboy
Regular
Posts: 124
Joined: Wed Aug 30, 2006 6:26 pm
Location: Brisbane

Post by prboy »

the actual bearing in the carrier is just a usual cartridge ball bearing, with the housing pressed together around the bearing.
Deanos
Regular
Posts: 226
Joined: Sun Sep 17, 2006 11:01 am
Location: caboolture

Post by Deanos »

Trent the guy who does torque shafts now does the rubbers for tube!.the one i got was $150 and wont break for a very long time.it probly has twice the rubber of a standard one.
my blue td
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

Deanos wrote:Trent the guy who does torque shafts now does the rubbers for tube!.the one i got was $150 and wont break for a very long time.it probly has twice the rubber of a standard one.
any contact details fo rthis guy for other members to get hold of him?
"No thank you, Turkish; I'm sweet enough."

Image
Deanos
Regular
Posts: 226
Joined: Sun Sep 17, 2006 11:01 am
Location: caboolture

Post by Deanos »

anyone serious about gettin one can p.m me or loops or evan Matt[OTD079 i think]
my blue td
JJ86
n00b
Posts: 2
Joined: Sat Feb 24, 2007 5:04 pm
Location: WA

Post by JJ86 »

has anyone got a photo of this part as i have an intermitent nock
from under the car near the back off consol and been told it could
becaused by this and i do not now what i am looking for as it is my
first gemini
Gene FJ20DEBT
Supreme Overlord
Posts: 9056
Joined: Sat May 14, 2005 10:32 pm
Location: Brisnyland, QLD AKA: NISMOgemini
Contact:

Post by Gene FJ20DEBT »

JJ86 wrote:has anyone got a photo of this part as i have an intermitent nock
from under the car near the back off consol and been told it could
becaused by this and i do not now what i am looking for as it is my
first gemini
number 2

Image
Image
"No thank you, Turkish; I'm sweet enough."

Image
JJ86
n00b
Posts: 2
Joined: Sat Feb 24, 2007 5:04 pm
Location: WA

Post by JJ86 »

thanks gene fj2odet this helps heaps :D
mitch.mofo
Chatterbox
Posts: 77
Joined: Mon Jun 08, 2009 1:22 pm
Location: Victoria

Post by mitch.mofo »

i just bought a used torque tube rubber & entire torque tube for my 1976 tx sedan from the wreckers for $75 :D
RedGemCoupe
Long Term Member
Posts: 1659
Joined: Fri Jul 11, 2008 7:53 pm
Location: Queensland SE

Post by RedGemCoupe »

The wreckers I normally go to has only one Gemini and that has been just about stripped out.
Image
mitch.mofo
Chatterbox
Posts: 77
Joined: Mon Jun 08, 2009 1:22 pm
Location: Victoria

Post by mitch.mofo »

the wreckers i went too had a couple geminis and i ended up having to take apart the torque tube because it was the wrong length for my car and just take the rubbers and mount from it and put it back on the old one
danztg-gem
New Member
Posts: 31
Joined: Sun Apr 19, 2009 10:37 pm
Location: cairns

Post by danztg-gem »

where did u find the numberd part page of the diff and stuff :shock: ?? and is there more??
155-low
Regular
Posts: 347
Joined: Sun Jul 22, 2007 7:55 pm

Post by 155-low »

Trents Heavy duty torque tube rubbers

Image Image

Torque tube donut rubber and bearing (Bearing assembly cushion)

Image

http://www.ozgemini.com/forums/non-tech ... hp?t=27672
Post Reply